[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[debian-users:13644] Re: X setup for V3 ViRGE/GX

ISHIKAWA Mutsumi wrote:
>  Debian のバージョンは?
>  X サーバのバージョンは?

デビアンは２．０、
Ｘサーバーは３．３．２．１−３
となっています。

X.log を添付します。

菊地尚志

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.35 i686 [ELF] 
Configured drivers:
  S3V: accelerated server for S3 graphics adaptors (Patchlevel 0)
      s3_ViRGE
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "jp"
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) S3V: Graphics device ID: "Primary Card"
(**) S3V: Monitor ID: "Primary Monitor"
(--) S3V: Mode "320x240" needs vert refresh rate of 60.07 Hz. Deleted.
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc:unscaled,/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi"
(--) S3V: PCI: ViRGE/DX or /GX rev 1, Linear FB @ 0xf8000000
(--) S3V: chipset:   ViRGE/GX rev. 1
(--) S3V: chipset driver: s3_ViRGE
(--) S3V: videoram:  2048k
(--) S3V: Ramdac type: s3_trio64
(--) S3V: Ramdac speed: 170 MHz
(--) S3V: Using Trio32/64 programmable clock (MCLK 66.222 MHz)
(--) S3V: Maximum allowed dot-clock: 170.000 MHz
(**) S3V: Mode "640x480": mode clock =  25.180
(--) S3V: There is no mode definition named "320x240"
(--) S3V: Removing mode "320x240" from list of valid modes.
(--) S3V: Using 6 bits per RGB value
(--) S3V: Virtual resolution set to 640x480
(--) S3V: Local bus LAW is 0xF80xxxxx
(--) S3V: Using a banksize of 2048k, line width of 640


waiting for X server to shut down