[debian-users:20456] Re: can't used LAN card

[Toshimi Horie <wh2k@xxxxxxxxxxxxxxxxx>]

At 16:12 00/01/31 +0900, you wrote:

おぎそさん、こんにちは。

> こんにちは。
>
> > slinkをインストールした後、再起動時にはピィと音が鳴りcdmgrは
> > 動いているようで、ifconfig　-aでは下記の通りとなってます。
>
> dmesg も見せてもらえますか？

dmesgは下記の通りです。

Memory: sized by int13 0e801h
Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fd8d0
pcibios_init : BIOS32 Service Directory entry at 0xf4c00
pcibios_init : PCI BIOS revision 2.10 entry at 0xf4e0d
Probing PCI hardware.
Calibrating delay loop.. ok - 299.83 BogoMIPS
Memory: 94788k/98240k available (1136k kernel code, 384k reserved, 1932k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: IGMP, ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.36 (root@gondor) (gcc version 2.7.2.3) #2 Sun Feb 21 
15:55:27 EST 1999
Starting kswapd v 1.4.2.2
Real Time Clock Driver v1.09
tpqic02: Runtime config, $Revision: 0.4.1.5 $, $Date: 1994/10/29 02:46:13 $
tpqic02: DMA buffers: 20 blocks, at address 0x282600 (0x28254c)
Ramdisk driver initialized : 16 ramdisks of 4096K size
loop: registered device at major 7
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
    ide0: BM-DMA at 0xfcd0-0xfcd7
    ide1: BM-DMA at 0xfcd8-0xfcdf
hda: IBM-DKLA-24320, 4126MB w/460kB Cache, CHS=559/240/63, UDMA
hdc: MATSHITADVD-ROM SR-8171, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.3 MAX_MD_DEV=4, MAX_REAL=8
Failed initialization of WD-7000 SCSI card!
scsi : 0 hosts.
scsi : detected total.
Partition check:
 hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Adding Swap: 130748k swap-space (priority -1)
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
Linux PCMCIA Card Services 3.0.5
  kernel build: 2.0.36 unknown
  options:  [pci] [cardbus]
Intel PCIC probe:
  Intel i82365sl DF at port 0x3e0 ofs 0x00, 1 socket
    host opts [0]: none
    ISA irqs (scanned) = 3,4,7,9 status change on irq 9
cs: IO port probe 0x1000-0x17ff: excluding nothing: probe failed.
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x330-0x337 
0x378-0x37f 0x388-0x38f 0x398-0x39f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: excluding 0xdc000-0xdffff
cs: memory probe 0x0e0000-0x0effff: excluding 0xe0000-0xeffff
cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
eth0: TDK LAK-CD021, sram 4K TX*2, port 0x100, irq 3, hw_addr 00:80:98:B0:E8:B9
PS/2 auxiliary pointing device detected -- driver installed.

*-------------------------------------------
        Toshimi Horie . WH2K/JE2UFF

        e-mail : je2uff@xxxxxxxxxxxxxx (home1)
        e-mail : wh2k@xxxxxxxxxxxxxxxxx (home2)
        e-mail : je2uff@xxxxxxxxxxxxxxxxx (ML-admin)
        e-mail : Je2uff@xxxxxxx  (reserved)