[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:31825] WACOM FAVO が X 上で利用できない
吉田と申します。
Omoikane GNU/Linux free 2.0 上での現象なので、ogl-user@xxxxxxxxxxxxxx に
ポストしましたが、反応がないようでしたので、こちらにポストさせて頂きまし
た。長文になってしまいますが、よろしくお願いします。
WACOM 製タブレット「FAVO」を X 上で利用したいのですが、難航しています。
dmesg で認識されている事や、lsmod でモジュールがロードされている事、FAVO
の LED が点灯している事は確認でき、X のログを見ても認識されているとは思
うのですが、ポインタが動きません。
各パッケージのバージョンですが、OGL free 2.0 で試行後、状況が変化しない
ので、Debian unstable に apt-get upgrade して試行錯誤しています。
kernel は 2.4.9、xserver-xfree86 は 4.1.0-14です。
web 上の情報としては、下記 URL を参考にしました。
http://www.ksky.ne.jp/~exarias/favo-u.html
上記情報ですと、カーネルの再構築や、場合によっては wacom.c の修正が必要
なようでしたが、カーネルレベルで認識させるための作業のようでしたので、
カーネルの再構築や wacom.c の修正は行っていません。
web 上の情報を見ると、話題に上がる FAVO のバージョンが ET-0405-UV1.2 で
ある事に対して、私のものは ET-0405-UV1.1-1 である事が気にかかります。
FAVO を使えている方、FAVO 本体のバージョンや XF86Config-4 の記述をお聞か
せ願えませんでしょうか？
ハードウェア環境は以下の通りです。
Tablet WACOM FAVO ET-0405-U (USB)
PC SHARP PC-PJ2-X4
http://support.sharp.co.jp/mebius/detail/PC-PJ2-X4/spec.asp
付属の外付けFDDにパラレル、シリアル、PS/2ポートがあり、
そこにPS/2キーボードを接続しています。
以下、各種ログです。
---------------# dmesg----------------
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 10 for device 00:07.2
PCI: Sharing IRQ 10 with 00:03.0
uhci.c: USB UHCI at I/O 0xfca0, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: :USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB device 2 (vend/prod 0x56a/0x10) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
usb.c: registered new driver hid
hid.c: v1.16:USB HID support drivers
usb.c: registered new driver usb_mouse
mouse0: PS/2 mouse device for input0
input0: WACOM ET-0405-UV1.1-1 on usb1:2.0
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usb.c: registered new driver wacom
wacom.c: v1.14:USB Wacom Graphire and Wacom Intuos tablet driver
event0: Event device for input0
---------------# lsmod-----------------
Module Size Used by
parport_pc 23492 1 (autoclean)
lp 6208 0 (autoclean) (unused)
parport 24960 1 (autoclean) [parport_pc lp]
evdev 4384 0 (unused)
wacom 3680 0 (unused)
usbmouse 2240 0 (unused)
hid 11968 0 (unused)
mousedev 4256 0 (unused)
input 3680 0 [evdev wacom usbmouse hid mousedev]
uhci 22568 0 (unused)
msdos 5208 0 (autoclean)
nls_cp437 4384 1 (autoclean)
vfat 8984 1 (autoclean)
fat 31768 0 (autoclean) [msdos vfat]
rtl8139 12096 1
pci-scan 3396 1 [rtl8139]
esssolo1 25728 0 (unused)
soundcore 4324 4 [esssolo1]
gameport 1852 0 [esssolo1]
apm 9360 1
rtc 5912 0 (autoclean)
---------------/var/log/XFree86.0.log---------------
(II) Keyboard "Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Touch Pad: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Touch Pad: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Touch Pad: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Touch Pad: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Touch Pad: ZAxisMapping: buttons 4 and 5
(**) Option "AlwaysCore"
(**) Favo Pen: always reports core events
(**) Favo Pen serial device is /dev/input/event0
(**) Favo Pen is in absolute mode
(**) Option "USB" "on"
(**) Favo Pen: reading USB link
(**) Option "KeepShape" "on"
(**) Favo Pen: keeps shape
(**) Option "MaxX" "10206"
(**) Favo Pen: max x = 10206
(**) Option "MaxY" "7422"
(**) Favo Pen: max x = 7422
(**) Favo Pen: resol x = 1270
(**) Option "BaudRate" "9600"
(**) Favo Pen: serial speed 9600
(**) Option "AlwaysCore"
(**) Favo Eraser: always reports core events
(**) Favo Eraser serial device is /dev/input/event0
(**) Favo Eraser is in absolute mode
(**) Option "USB" "on"
(**) Favo Eraser: reading USB link
(**) Option "KeepShape" "on"
(**) Favo Eraser: keeps shape
(**) Option "MaxX" "10206"
(**) Favo Eraser: max x = 10206
(**) Option "MaxY" "7422"
(**) Favo Eraser: max x = 7422
(**) Favo Eraser: resol x = 1270
(**) Option "BaudRate" "9600"
(**) Favo Eraser: serial speed 9600
(**) Option "AlwaysCore"
(**) Favo Mouse: always reports core events
(**) Favo Mouse serial device is /dev/input/event0
(**) Favo Mouse is in relative mode
(**) Option "USB" "on"
(**) Favo Mouse: reading USB link
(**) Option "KeepShape" "on"
(**) Favo Mouse: keeps shape
(**) Option "MaxX" "10206"
(**) Favo Mouse: max x = 10206
(**) Option "MaxY" "7422"
(**) Favo Mouse: max x = 7422
(**) Favo Mouse: resol x = 1270
(**) Option "BaudRate" "9600"
(**) Favo Mouse: serial speed 9600
(II) XINPUT: Adding extended input device "Favo Mouse" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "Favo Eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "Favo Pen" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Touch Pad" (type: MOUSE)
(**) Option "Device" "/dev/input/event0"
(==) Wacom Kernel Input device name: "WACOM ET-0405-UV1.1-1"
(==) Wacom tablet maximum X=10206 maximum Y=7422 X resolution=0 Y resolution=0 suppress=0
(==) Wacom tablet top X=0 top Y=0 bottom X=9897 bottom Y=7422
(==) Wacom tablet top X=0 top Y=0 bottom X=9897 bottom Y=7422
(==) Wacom tablet top X=0 top Y=0 bottom X=9897 bottom Y=7422
---------------/etc/X11/XF86Config-4------------------
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Default Screen" 0 0
InputDevice "Keyboard" "CoreKeyboard"
InputDevice "Touch Pad" "CorePointer"
InputDevice "Favo Pen" "AlwaysCore"
InputDevice "Favo Eraser" "AlwaysCore"
InputDevice "Favo Mouse" "AlwaysCore"
EndSection
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "xtt"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "jp106"
Option "XkbLayout" "jp"
EndSection
Section "InputDevice"
Identifier "Touch Pad"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
identifier "Favo Pen"
Driver "wacom"
Option "Type" "stylus"
Option "Device" "/dev/input/event0"
Option "Mode" "Absolute"
Option "AlwaysCore" "on"
Option "MaxX" "10206"
Option "MaxY" "7422"
Option "KeepShape" "on"
Option "USB" "on"
Endsection
Section "InputDevice"
identifier "Favo Eraser"
Driver "wacom"
Option "Type" "eraser"
Option "Device" "/dev/input/event0"
Option "Mode" "Absolute"
Option "AlwaysCore" "on"
Option "MaxX" "10206"
Option "MaxY" "7422"
Option "KeepShape" "on"
Option "USB" "on"
Endsection
Section "InputDevice"
identifier "Favo Mouse"
Driver "wacom"
Option "Type" "cursor"
Option "Device" "/dev/input/event0"
Option "Mode" "Relative"
Option "AlwaysCore" "on"
Option "MaxX" "10206"
option "MaxY" "7422"
Option "KeepShape" "on"
Option "USB" "on"
Endsection