[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: po-debconf: sslh
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver. Your address is not
listed as a subscriber, and no commands were found in your message.
MAILING LIST HELP FILE
Please read the list guidelines (see below) before engaging in discussion.
In addition, familiarize yourself with how the list operates, especially if
you've never participated in an Internet email discussion group before.
It's a good idea to save this message somewhere so you know how to
unsubscribe.
When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.
COMMANDS
These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list. Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message.
Any other fields are ignored... it doesn't matter what you put in them.
The following commands are accepted:
subscribe
Adds your e-mail address to the list of subscribers.
You will then receive all posts.
You are then allowed to post from that address.
unsubscribe
Removes your e-mail address from the list of subscribers.
You will no longer receive any posts.
You are no longer allowed to post.
subscribe digest
Switches you to digest mode.
You will then receive one message per day which lists all posts.
To switch back, send a "subscribe" command.
digests
Returns a list of digests for the past 30 days along with
instructions for retrieving them via e-mail.
help
This message will be returned.
POSTS
Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.
To correspond with a List Administrator regarding problems, write to
postmaster@xxxxxxxxxxxxxxxxx
-------------------- Original Message Follows --------------------
On Mon, 16 May 2011 06:04:14 +0900
Hideki Yamane <henrich@debian.or.jp> wrote:
#027#$B!!#027#(BBug#628461#027#$B!!$H$7$FEPO?$7$^$7$?!##027#(B
--
Regards,
Hideki Yamane henrich @ debian.or.jp/org
http://wiki.debian.org/HidekiYamane