[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: po-debconf: slapos.tool.format



No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
No action was taken on your mail by this listserver.  Your address is not
listed as a subscriber, and no commands were found in your message.



MAILING LIST HELP FILE

Please read the list guidelines (see below) before engaging in discussion. 
In addition, familiarize yourself with how the list operates, especially if 
you've never participated in an Internet email discussion group before.  
It's a good idea to save this message somewhere so you know how to 
unsubscribe.

When dealing with an automated list manager, there are two types of messages:
COMMANDS and POSTS. Unlike traditional list software which require the use of
numerous email addresses, we have simplified the process by allowing for both
COMMANDS and POSTS to be sent to the SAME address.

COMMANDS 

These e-mail messages are intended to cause some action to occur, such as
subscribing the FROM address to a mailing list.  Commands are usually one or
two word phrases which should be entered in the SUBJECT field of the message. 
Any other fields are ignored... it doesn't matter what you put in them.

The following commands are accepted:

subscribe
    Adds your e-mail address to the list of subscribers.
    You will then receive all posts.
    You are then allowed to post from that address.
 
unsubscribe
    Removes your e-mail address from the list of subscribers.
    You will no longer receive any posts.
    You are no longer allowed to post.

subscribe digest
    Switches you to digest mode.
    You will then receive one message per day which lists all posts.
    To switch back, send a "subscribe" command.
    
digests
    Returns a list of digests for the past 30 days along with 
    instructions for retrieving them via e-mail.

help
    This message will be returned.


POSTS

Email messages which don't match any commands are distributed to everyone
on the list. Every time you post a message, everyone on the list will receive
a copy, just as if you sent it to them personally. As a member of the list,
you will receive a copy of every message anyone else sends. Some of the lists
on this server require you to subscribe to that list before you are allowed
to post messages. Some lists are restricted and only the list moderator(s) is
permitted to post messages to those lists.



To correspond with a List Administrator regarding problems, write to 
postmaster@xxxxxxxxxxxxxxxxx



-------------------- Original Message Follows --------------------
On Sun, 15 May 2011 21:40:52 +0900
Hideki Yamane <henrich@debian.or.jp> wrote:
> #027#$B!!::FI$"$j$,$H$&$4$6$$$^$9!##027#(Bdebian-i18n
#027#$B%a!<%j%s%0%j%9%H$G85!9$N%F%s%W%l!<%H#027#(B
>
#027#$B!!JQ99$,M=9p$5$l$?$N$G!"$=$A$i$,40N;$7$F$+$i%^!<%8$7$F3NG'$r$7$?$$$H;W$$$^$9!##027#(B

#027#$B!!99?7$5$l$?$N$G:FEY::FI$/$@$5$$!##027#(B


#. Type: string
#. Description
#: ../templates:2001
msgid "SlapOS master node URL:"
msgstr "SlapOS #027#$B$N%^%9%?!<%N!<%I#027#(B URL:"

#. Type: note
#. Description
#: ../templates:3001
msgid "Master node key and certificate mandatory"
msgstr "#027#$B%^%9%?!<%N!<%I80$H>ZL@=q$,I,MW$G$9#027#(B"

#. Type: note
#. Description
#: ../templates:3001
msgid ""
"You used an HTTPS URL for the SlapOS master node, so the corresponding "
"certificate must be placed in /etc/slapos/ssl/slapos.crt, and the key in /"
"etc/slapos/ssl/slapos.key, readable only to root."
msgstr ""
"HTTPS URL #027#$B$r%^%9%?!<%N!<%I$H$7$FF~NO$7$?$N$G!"#027#(Broot
#027#$B$N$_$,FI$_<h$l$k$h$&$K$7$?!"#027#(B"
"#027#$BBP1~$9$k80$H>ZL@=q$r#027#(B /etc/slapos/ssl/slapos.key
#027#$B$H#027#(B /etc/slapos/ssl/slapos.crt "
"#027#$B$KCV$/I,MW$,$"$j$^$9!##027#(B"

#. Type: string
#. Description
#: ../templates:4001
msgid "SlapOS client ID:"
msgstr "SlapOS #027#$B$N%/%i%$%"%s%H#027#(B ID:"

#. Type: string
#. Description
#: ../templates:4001
msgid "Please specify a unique identifier for this SlapOS node."
msgstr "#027#$B$3$N#027#(B SlapOS
#027#$B%N!<%IMQ$N0l0U$N<1JL;R$r;XDj$7$F$/$@$5$$!##027#(B"

#. Type: string
#. Description
#: ../templates:5001
msgid "Number of Computer Partitions on this computer:"
msgstr "#027#$B$3$N%3%s%T%e!<%?!<>e$N%3%s%T%e!<%?!<%Q!<%F%#%7%g%s?t#027#(B:"

#. Type: string
#. Description
#: ../templates:5001
msgid ""
"A Computer Partition (CP) is an instance of a Software Release (SR). You can
"
"now define how many instances will be available on this computer."
msgstr ""
"#027#$B%3%s%T%e!<%?!<%Q!<%F%#%7%g%s#027#(B (CP)
#027#$B$O!"%=%U%H%&%'%"%j%j!<%9#027#(B (SR) #027#$B$N%$%s%9%?%s#027#(B"
"#027#$B%9$G$9!#$3$N%3%s%T%e!<%?!<>e$G$$$/$D$N%$%s%9%?%s%9$,MxMQ2DG=$+$r$3$3$GDj5A$G#027#(B"
"#027#$B$-$^$9!##027#(B"

#. Type: string
#. Description
#: ../templates:5001
msgid ""
"Note that the Software Releases will be stored in /var/lib/slapos/software/,
"
"whereas the Computer Partition will be stored in /var/lib/slapos/instance/."
msgstr ""
"#027#$B%=%U%H%&%'%"%j%j!<%9$O#027#(B /var/lib/slapos/software/
#027#$B$K!"$=$7$F%3%s%T%e!<%?!<%Q!<#027#(B"
"#027#$B%F%#%7%g%s$O#027#(B /var/lib/slapos/instance/
#027#$B$KJ]B8$5$l$^$9!##027#(B"

#. Type: string
#. Description
#: ../templates:6001
msgid "Local IPv4 network to be used for Computer Partitions:"
msgstr "#027#$B%3%s%T%e!<%?!<%Q!<%F%#%7%g%s$K;H$&%m!<%+%k#027#(B IPv4
#027#$B%M%C%H%o!<%/#027#(B:"

#. Type: string
#. Description
#: ../templates:6001
msgid ""
"Every Computer Partition must have an address on the same IPv4 network. "
"Please specify a network in CIDR notation (e.g.: 192.0.2.0/24)."
msgstr ""
"#027#$B$9$Y$F$N%3%s%T%e!<%?!<%Q!<%F%#%7%g%s$OF1$8#027#(B IPv4
#027#$B%M%C%H%o!<%/>e$N%"%I%l%9#027#(B"
"#027#$B$r;}$DI,MW$,$"$j$^$9!#%M%C%H%o!<%/$r#027#(B CIDR
#027#$B5-K!$G;XDj$7$F$/$@$5$$#027#(B (#027#$BNc#027#(B: "
"192.0.2.0/24)"

#. Type: note
#. Description
#: ../templates:7001
msgid "Network configuration note"
msgstr "#027#$B%M%C%H%o!<%/@_Dj$K$D$$$F$NCm0U#027#(B"

#. Type: note
#. Description
#: ../templates:7001
msgid ""
"Before using the slapformat script, you must set up a network bridge to be "
"used by the Computer Partitions, and ensure IPv6 is enabled."
msgstr ""
"#027#$B<B:]$K#027#(B slapformat
#027#$B%9%/%j%W%H$r<B9T$9$kA0$K!"I,$:%3%s%T%e!<%?!<%Q!<%F%##027#(B"
"#027#$B%7%g%s$,;H$&%V%j%C%8$r@_Dj$7$F#027#(B IPv6
#027#$B$rM-8z$K$7$F$*$/I,MW$,$"$j$^$9!##027#(B"

#. Type: note
#. Description
#: ../templates:7001
msgid ""
"You can find more information in /usr/share/doc/slapformat/README.Debian."
msgstr "#027#$B$h$j>\:Y$O#027#(B /usr/share/doc/slapformat/README.Debian
#027#$B$K$"$j$^$9!##027#(B"