[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[debian-users:15447] [Q] startx & WindowMaker Warnings

From: Hiroyuki Shimada <shimaden@xxxxxxxxxxx>
Subject: [debian-users:15447] [Q] startx & WindowMaker Warnings
Date: Sun, 16 May 1999 22:25:29 +0900
X-ml-info: If you have a question, send a mail with the body "# help" (without quotes) to the address debian-users-ctl@debian.or.jp; help=<mailto:debian-users-ctl@debian.or.jp?body=help>
X-ml-name: debian-users
X-mlserver: fml [fml 2.2]; post only (only members can post)
Message-id: <373EC75012C.4996SHIMADEN@xxxxxxxxxxxxxxxx>
X-mail-count: 15447
X-mailer: Becky! ver 1.25.04

　こんにちは。島田です。

　Debian GNU/Linux 2.1、Kernel 2.2.9 で XFree86 SVGA を使っています。
　startx するとちゃんと起動して X での作業はできるのですが、次のような
Warning が出ます。

　主にフォント関係がおかしい、というメッセージだというのは見当が付くので
すが、これはどうしたら直るのでしょうか。

　startx 2&> file して、WindowMaker から単に Exit して X を終了したときの
メッセージです。
　質問するのに何か足りない情報がありましたら、教えていただけましたら幸い
です。

　よろしくお願いいたします。


XFree86 Version 3.3.2.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: July 15 1998
	If the server is older than 6-12 months, or if your card is newer
	than the above date, look for a newer version before reporting
	problems.  (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.36 i686 [ELF] 
Configured drivers:
  SVGA: server for SVGA graphics adaptors (Patchlevel 0):
      NV1, STG2000, RIVA128, ET4000, ET4000W32, ET4000W32i,
      ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a,
      ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100,
      et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33,
      gvga, ati, sis86c201, sis86c202, sis86c205, tvga8200lx, tvga8800cs,
      tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i,
      tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi,
      tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
      tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
      3dimage975, 3dimage985, clgd5420, clgd5422, clgd5424, clgd5426,
      clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480,
      clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235,
      clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, ncr77c22, ncr77c22e,
      cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, oti067, oti077,
      oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401,
      cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv,
      ark2000pv, ark2000mt, mx, realtek, AP6422, AT24, AT3D, s3_virge,
      s3_svga, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545,
      ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct64200,
      ct64300, generic
(using VT number 7)

XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: disabled
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3
(**) Mouse: 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "SHIMADEN VIDEO CARD"
(**) SVGA: Monitor ID: "SHIMADEN MONITOR"
(--) SVGA: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) SVGA: chipset:  clgd5428
(--) SVGA: videoram: 1024k
(--) SVGA: clocks:  25.23  28.32  41.16  36.08  31.50  39.99  45.08  49.87
(--) SVGA: clocks:  64.98  72.16  75.00  80.01  85.23
(**) SVGA: Using 8 bpp, Depth 8, Color weight: 666
(--) SVGA: Maximum allowed dot-clock: 85.500 MHz
(**) SVGA: Mode "800x600": mode clock =  39.990, clock used =  39.991
(**) SVGA: Mode "640x480": mode clock =  31.500, clock used =  31.499
(**) SVGA: Mode "1024x768": mode clock =  75.000, clock used =  74.999
(**) SVGA: Virtual resolution set to 1152x900
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: clgd5428: Internal memory clock register is 0x1c (Extended RAS)
(**) SVGA: clgd5428: Approximate DRAM bandwidth for drawing: 60 of 100 MB/s
(--) SVGA: clgd5428: 11776 bytes off-screen memory available
(--) SVGA: clgd5428: Using hardware cursor
(--) SVGA: clgd5428: Using accelerator functions
(--) SVGA: clgd5428: Using BitBLT engine
(--) SVGA: Using XAA (XFree86 Acceleration Architecture)
(--) SVGA: XAA: Solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: Using 9 128x9 areas for pixmap caching
(--) SVGA: XAA: Caching tiles and stipples
(--) SVGA: XAA: Horizontal and vertical lines and segments
Warning: Cannot convert string "-*--16-*-jisx0208-1983-0" to type FontStruct
Warning: translation table syntax error: Modifier or '<' expected 
Warning: ... found while parsing '*VT100.Translations: override  <Key>Backspace: string("")'
/usr/X11R6/bin/WindowMaker warning: the following character sets are missing in -*-helvetica-medium-r-normal-*-12-*-*-*-*-*-*-*:
/usr/X11R6/bin/WindowMaker warning: JISX0208.1990-0
/usr/X11R6/bin/WindowMaker warning: JISX0201.1976-0
/usr/X11R6/bin/WindowMaker warning: the string "" will be used in place of any characters from those sets.
/usr/X11R6/bin/WindowMaker warning: the following character sets are missing in -*-helvetica-bold-r-normal-*-12-*-*-*-*-*-*-*:
/usr/X11R6/bin/WindowMaker warning: JISX0208.1990-0
/usr/X11R6/bin/WindowMaker warning: JISX0201.1976-0
/usr/X11R6/bin/WindowMaker warning: the string "" will be used in place of any characters from those sets.
/usr/X11R6/bin/WindowMaker warning: the following character sets are missing in -*-helvetica-bold-r-normal-*-24-*-*-*-*-*-*-*:
/usr/X11R6/bin/WindowMaker warning: JISX0208.1990-0
/usr/X11R6/bin/WindowMaker warning: JISX0201.1976-0
/usr/X11R6/bin/WindowMaker warning: the string "" will be used in place of any characters from those sets.

waiting for X server to shut down kterm:  fatal IO error 32 (Broken pipe) or KillClient on X server ":0.0"


----------------------------------------------------------------------
Mail: shimaden@xxxxxxxxxxx
Home Page: http://www.annie.ne.jp/~shimaden/
島田博幸
Hiroyuki Shimada
----------------------------------------------------------------------

Prev by Date: [debian-users:15446] Re: Japanese font in Netscape input Form
Next by Date: [debian-users:15448] Re: window の " ふち " がなくなった in GNOME
Previous by thread: [debian-users:15445] [solution]Pickup 0.0.0.0 UDP
Next by thread: [debian-users:15450] X setup Problem
Index(es):
- Date
- Thread