[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:37572] Re: カーネルのアップグレードでネットワークが・・・
村上です。
Sun, 29 Jun 2003 08:53:32 +0900頃、Seiji Kanekoさんが出された
“[debian-users:37532] Re: カーネルのアップグレードでネットワークが・・・”について
> 結局どういうエラーが出ているかが分からないので推定の域を出ませ
> んが、pcmcia 周りの誰かが初期化に時間がかかっているのかな。ネ
> ットワーク関係起動する前にダミーで使ってないドライバ読んで時間
> を稼ぐとか、関連スクリプトの頭に sleep 2 ぐらい入れたらどうな
> ります？
逆に、エラーとかが出てないのです。
インストール時のカーネルでは、ちゃんと動くことから何らかのパラメー
タかカーネル作成時のパラメータの問題ではないかと思っているのですが、
どうにも検討がつかなくて悩んでいます。
------
村上 亨／Tohru Murakami
——————————————————————————————
●2.2.19でインストール時のものの場合
Linux version 2.2.19pre17 (herbert@arnor) (gcc version 2.7.2.3) #1 Tue Mar 13 22:37:59 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 07df0000 @ 00100000 (usable)
Detected 668194 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1333.65 BogoMIPS
Memory: 126040k/129984k available (1744k kernel code, 412k reserved, 1632k data, 156k init)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6.4.0 initialized
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
128K L2 cache (4 way)
CPU: L2 Cache: 128K
CPU: Intel Pentium III (Coppermine) stepping 06
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@xxxxxxxxxxxxx)
PCI: PCI BIOS revision 2.10 entry at 0xfd9de
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MPG3204AT E, ATA DISK drive
hdc: CD-224E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: FUJITSU MPG3204AT E, 19546MB w/512kB Cache, CHS=2491/255/63
hdc: ATAPI 24X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
Failed initialization of WD-7000 SCSI card!
IBM MCA SCSI: Version 3.2
IBM MCA SCSI: No Microchannel-bus present --> Aborting.
This machine does not have any IBM MCA-bus
or the MCA-Kernel-support is not enabled!
megaraid: v1.11 (Aug 23, 2000)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
apm: disabled on user request.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 156k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 248968k swap-space (priority -1)
Linux PCMCIA Card Services 3.1.22
kernel build: 2.2.19pre17 unknown
options: [pci] [cardbus] [apm]
PCI routing table version 1.0 at 0xfdf70
01:03.1 -> irq 5
Intel PCIC probe:
TI 1420 rev 00 PCI-to-CardBus at slot 01:03, mem 0x68000000
host opts [0]: [pci + serial irq] [no pci irq] [lat 168/176] [bus 32/34]
host opts [1]: [pci + serial irq] [pci irq 5] [lat 168/176] [bus 35/37]
ISA irqs (scanned) = 3,4,7,9,11 polling interval = 1000 ms
cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 35): vendor 0x1259, device 0xa117
rtl8139.c:v1.13 1/9/2001 Donald Becker, becker@xxxxxxxxxx
http://www.scyld.com/network/rtl8139.html
cs: cb_config(bus 35)
fn 0 bar 1: io 0x200-0x2ff
fn 0 bar 2: mem 0x60001000-0x600011ff
irq 3
cs: cb_enable(bus 35)
bridge io map 0 (flags 0x21): 0x200-0x2ff
bridge mem map 0 (flags 0x1): 0x60001000-0x60001fff
rtl8139_attach(bus 35, function 0)
eth0: RealTek RTL8139B PCI/CardBus at 0x200, IRQ 3, 00:90:99:48:c8:d6.
——————————————————————————————
●2.4.18でカーネルを自分で作成したもの
Linux version 2.4.18 (root@amago) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Tue Nov 5 20:31:28 JST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ef0000 (usable)
BIOS-e820: 0000000007ef0000 - 0000000007effc00 (ACPI data)
BIOS-e820: 0000000007effc00 - 0000000007f00000 (ACPI NVS)
BIOS-e820: 0000000007f00000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
On node 0 totalpages: 32496
zone(0): 4096 pages.
zone(1): 28400 pages.
zone(2): 0 pages.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Kernel command line: BOOT_IMAGE=Linux ro root=301
Initializing CPU#0
Detected 668.194 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1333.65 BogoMIPS
Memory: 125124k/129984k available (1350k kernel code, 4472k reserved, 401k data, 252k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Celeron (Coppermine) stepping 06
per-CPU timeslice cutoff: 365.52 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 668.2268 MHz.
..... host bus clock speed is 66.8225 MHz.
cpu: 0, clocks: 668225, slice: 334112
CPU0<T0:668224,T1:334112,D:0,S:334112,C:668225>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfd9de, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0
PCI: Found IRQ 5 for device 01:03.1
PCI: Sharing IRQ 5 with 00:1f.2
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IA-32 Microcode Update Driver: v1.09 <tigran@xxxxxxxxxxx>
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
ACPI: Core Subsystem version [20011018]
ACPI: Subsystem enabled
ACPI: System firmware supports S0 S1 S3 S4 S5
Processor[0]: C0 C1 C2
ACPI: Power Button (FF) found
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
Real Time Clock Driver v1.10e
i810_rng hardware driver 0.9.6 loaded
block: 128 slots per queue, batch=32
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MPG3204AT E, ATA DISK drive
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40031712 sectors (20496 MB) w/512KiB Cache, CHS=2491/255/63, UDMA(66)
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: Detected an Intel i810 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.1.0 20010616 on minor 0
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Assigned IRQ 9 for device 01:03.0
PCI: Found IRQ 5 for device 01:03.1
PCI: Sharing IRQ 5 with 00:1f.2
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Yenta IRQ list 0898, PCI irq9
Socket status: 30000006
Yenta IRQ list 0898, PCI irq5
Socket status: 30000020
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 5 for device 00:1f.2
PCI: Sharing IRQ 5 with 01:03.1
PCI: Setting latency timer of device 00:1f.2 to 64
uhci.c: USB UHCI at I/O 0x1080, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cs: cb_alloc(bus 35): vendor 0x1259, device 0xa117
PCI: Enabling device 23:00.0 (0000 -> 0003)
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 252k freed
Adding Swap: 248968k swap-space (priority -1)
8139too Fast Ethernet driver 0.9.24
PCI: Setting latency timer of device 23:00.0 to 64
eth0: Allied Telesyn 8139 CardBus at 0xc88d7000, 00:90:99:48:c8:d6, IRQ 5
eth0: Identified 8139 chip type 'RTL-8139C'
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x87f
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
——————————————————————————————