[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:39372] raidのHDDを認識しません（intel845E）
亀澤と申します。
RAIDにwoodyをbf24でインストールしようと試みましたが、HDDを認識してくれませ
ん。
モジュールのプリロードで、dtp_i2oやsym53c416.oの組み込みに失敗しました。
（引数は何も渡していません）
どのようにすればHDDを認識できるのかご教授下さい。
IBM xSeries NX80-H01
チップセット：intel845E
ディスクインターフェイス：Ultra160SCSI（オンボード）
RAIDインターフェイス：Ultra160SCSI（ServerRAID−４Lx）
dmesgの内容------------------------------------
er: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 12K, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: bfebfbff 00000000 00000000 00000000
CPU: Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 1-0, 1-16, 1-20, 1-21 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 22.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
.... register #01: 00178020
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0020
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 1 1 0 1 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 1 1 0 1 0 1 1 71
0a 001 01 1 1 0 1 0 1 1 79
0b 001 01 1 1 0 1 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 000 00 1 0 0 0 0 0 0 00
11 001 01 1 1 0 1 0 1 1 A9
12 001 01 1 1 0 1 0 1 1 B1
13 001 01 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 001 01 1 1 0 1 0 1 1 C1
17 001 01 1 1 0 1 0 1 1 C9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2798.7852 MHz.
..... host bus clock speed is 133.2753 MHz.
cpu: 0, clocks: 1332753, slice: 666376
CPU0<T0:1332752,T1:666368,D:8,S:666376,C:1332753>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0220, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router default [8086/24c0] at 00:1f.0
PCI->APIC IRQ transform: (B0,I31,P0) -> 18
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 17
PCI->APIC IRQ transform: (B2,I3,P0) -> 19
PCI->APIC IRQ transform: (B2,I4,P0) -> 23
PCI->APIC IRQ transform: (B2,I5,P0) -> 22
PCI: Cannot allocate resource region 9 of bridge 00:1e.0
PCI: Cannot allocate resource region 4 of device 00:1f.3
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
IBM machine detected. Enabling interrupts during APM calls.
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
Console: switching to colour frame buffer device 80x30
fb0: VGA16 VGA frame buffer device
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb
PCI_IDE: chipset revision 2
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio
hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Loading I2O Core - (c) Copyright 1999 Red Hat Software
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
loop: loaded (max 8 devices)
Compaq CISS Driver (v 2.4.5)
HDLC support module revision 1.02 for Linux 2.4
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Highpoint HPT370 Softwareraid driver for linux version 0.01
No raid array found
SCSI subsystem driver Revision: 1.00
Red Hat/Adaptec aacraid driver, Apr 14 2002
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec aic7892 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
DC390: 0 adapters found
3ware Storage Controller device driver for Linux v1.02.00.016.
3w-xxxx: No cards with valid units found.
i2o_scsi.c: Version 0.0.1
chain_pool: 0 bytes @ c1404d20
(512 byte buffers X 4 can_queue X 0 i2o controllers)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1440k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 280k freed
VFS: Disk change detected on device ide1(22,0)
ISO 9660 Extensions: RRIP_1991A
VFS: Disk change detected on device fd(2,0)
VFS: Can't find ext3 filesystem on dev fd(2,0).
VFS: Can't find ext2 filesystem on dev fd(2,0).
cramfs: wrong magic
Loading Adaptec I2O RAID: Version 2.4 Build 5
Detecting Adaptec I2O RAID controllers...
VFS: Can't find ext3 filesystem on dev fd(2,0).
VFS: Can't find ext2 filesystem on dev fd(2,0).
cramfs: wrong magic
VFS: Disk change detected on device fd(2,0)
EXT3-fs: Unrecognized mount option noauto
EXT2-fs: Unrecognized mount option noauto
cramfs: wrong magic
終了------------------------------------
/var/log/messagesの内容------------------
Jan 27 21:57:36 (none) syslog.info syslogd started: BusyBox v0.60.3-pre
(2002.01.21-22:50+0000)
Jan 27 21:57:36 (none) user.info init: Starting pid 57, console /dev/tty4:
'/usr/bin/tail -f /proc/kmsg'
Jan 27 21:57:36 (none) user.info init: Starting pid 58, console /dev/tty3:
'/usr/bin/tail -f /var/log/messages'
Jan 27 21:57:36 (none) user.info init: Waiting for enter to start '-sh' (pid
59, console /dev/tty2)
Jan 27 21:57:36 (none) user.info init: Starting pid 60, console
/dev/console: '/sbin/udbootstrap'
Jan 27 21:57:36 (none) user.info dbootstrap[64]: dbootstrap starting; built
2002.05.16-04:54+0000 for i386
Jan 27 21:57:37 (none) user.info dbootstrap[64]: Unmounting partition
mounted at /instmnt
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_adapter_find_first
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_print_ioc_summary
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_reset_deregister
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_event_deregister
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_free_msg_frame
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_register
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_put_msg_frame
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_v_ASCQ_TablePtr
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_ASCQ_TableSz
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_adapter_find_next
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_reset_register
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_event_register
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_ScsiOpcodesPtr
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_send_handshake_request
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_deregister
Jan 27 21:58:24 (none) user.info dbootstrap[64]: mptscsih.o: unresolved
symbol mpt_get_msg_frame
Jan 27 21:58:24 (none) user.err dbootstrap[64]: ロードに失敗しました。
Jan 27 21:58:35 (none) user.info dbootstrap[64]: Warning: loading 53c7,8xx.o
will taint the kernel: forced load
Jan 27 21:58:35 (none) user.info dbootstrap[64]: 53c7,8xx.o: init_module: No
such device
Jan 27 21:58:35 (none) user.info dbootstrap[64]: Hint: insmod errors can be
caused by incorrect module parameters, including invalid IO or IRQ
parameters
Jan 27 21:58:35 (none) user.err dbootstrap[64]: ロードに失敗しました。
Jan 27 21:58:45 (none) user.info dbootstrap[64]: Warning: loading advansys.o
will taint the kernel: forced load
Jan 27 21:58:45 (none) user.info dbootstrap[64]: advansys.o: init_module: No
such device
Jan 27 21:58:45 (none) user.info dbootstrap[64]: Hint: insmod errors can be
caused by incorrect module parameters, including invalid IO or IRQ
parameters
Jan 27 21:58:45 (none) user.err dbootstrap[64]: ロードに失敗しました。
Jan 27 21:59:00 (none) user.info dbootstrap[64]: Warning: loading dpt_i2o.o
will taint the kernel: forced load
Jan 27 21:59:00 (none) user.info dbootstrap[64]: dpt_i2o.o: init_module: No
such device
Jan 27 21:59:00 (none) user.info dbootstrap[64]: Hint: insmod errors can be
caused by incorrect module parameters, including invalid IO or IRQ
parameters
Jan 27 21:59:00 (none) user.err dbootstrap[64]: ロードに失敗しました。
Jan 27 21:59:36 (none) user.info dbootstrap[64]: sym53c416.o: unresolved
symbol isapnp_find_dev
Jan 27 21:59:36 (none) user.err dbootstrap[64]: ロードに失敗しました。
終了------------------------------------
/proc/scsiの内容-------------------------
Attached devices: none
終了------------------------------------