[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:44879] Linux version 2.6.8-2-686-smpがブート不可
西谷と申します。(Linux 初心者です。)
Sarge で apt-get install kernel-image-2.6-686-smp を実行後
このカーネルをブートしたところ、
Unable to handle kernel NULL pointer dereference at virtual address 00000008
というメッセージを最後に表示したまま固まります。
必ず再現します。
ハードウェアは Intel D865PERL というマザーボードに Pentium4 3E と
メモリー 1GB をのせています。HDD は 10GB の 1 パーティションです。
ブート時に acpi=off または acpi=smp というオプションをセットすると
正常にブートできます。
また、testing や unstable から取得した kernel-image-2.6-686-smp
では、問題なくブートできます。
この版のカーネルパッケージはアップデートされないのでしょうか？
もし、バグ報告したほうがよいようでしたらその方法を教えていただき
ますようお願いします。
他の PC とシリアルケーブルで接続し、
ブート オプションに console=ttyS0,38400n8 をセットしてブートして
取得したコンソールメッセージは以下のとおりです。
Linux version 2.6.8-2-686-smp (horms@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Thu May 19 17:27:55 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fe30000 (usable)
BIOS-e820: 000000003fe30000 - 000000003fe3e6d5 (ACPI NVS)
BIOS-e820: 000000003ff10000 - 000000003ff30000 (reserved)
BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
126MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
DMI 2.3 present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000f62c0
ACPI: RSDT (v001 INTEL D865PERL 0x20050213 MSFT 0x00000097) @ 0x3ff30000
ACPI: FADT (v002 INTEL D865PERL 0x20050213 MSFT 0x00000097) @ 0x3ff30200
ACPI: MADT (v001 INTEL D865PERL 0x20050213 MSFT 0x00000097) @ 0x3ff30300
ACPI: ASF! (v016 LEGEND I865PASF 0x00000001 MSFT 0x0100000d) @ 0x3ff345f0
ACPI: WDDT (v001 INTEL OEMWDDT 0x00000001 MSFT 0x0100000d) @ 0x3ff34689
ACPI: DSDT (v001 INTEL D865PERL 0x00000006 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hdc2 ro console=ttyS0,38400n8
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 2992.789 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1028956k/1046720k available (1663k kernel code, 16856k reserved, 768k data, 168k init, 129216k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 5931.00 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
per-CPU timeslice cutoff: 2925.83 usecs.
task migration cache decay timeout: 3 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 3000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 5980.16 BogoMIPS
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
Total of 2 processors activated (11911.16 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 2992.0169 MHz.
..... host bus clock speed is 199.0477 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4620k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
Unable to handle kernel NULL pointer dereference at virtual address 00000008
--
M.Nishitani
wv45@xxxxxxxxxxxxxxxx