[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:48300] Re: 本日3/31にapt-get upgrade実施後X-Windowでの自動ログインが起動しない
武藤さん
こんばんは。
無理やりSSHを立ち上げましたが、Boot中なので少し待て、というメッセージが出てSSHのセッションが開けず、
SCPしても固まりますので、さしあたって、以下の情報を手打ちで送らせて頂きます。
シングルブート中だとそうなりますが、普通にブートして、問題の画面が
真っ黒になっているときにはSSHログインできますか？
要は、Xを起動するとSSHログインが切られる/接続できなくなる/pingでの
反応もなくなる ことはありますか？
ご教示いただきまして真っ黒黒すけ画面(recovery modeではなく通常起動)でSSHを試してみましたところ、ログインできました。
・上記のとおり、リモートログインしている状態でXを起動したときに
リモートログイン側も動かなくなるかどうか調べる。
動かなくはなりませんでしたが、SSHでリモートログインしてrootになり、startxを行うと以下のような
エラーメッセージが出ました
duft@debian0:/$ su -
Password:
debian0:~# startx
X: warning; process set to priority -1 instead of requested priority 0
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge3 20070107160638
jmm@galadriel)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.18-3-686 i686 [ELF]
Build Date: 07 January 2007
This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.
We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.
Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz
Module Loader present
OS Kernel: Linux version 2.4.27-2-686 (horms@xxxxxxxxxxxxxxxxxxxxxxxxxxx)
(gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 10:34:09 UTC 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 5 00:12:35 2007
(==) Using config file: "/etc/X11/XF86Config-4"
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No
symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No
symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":
No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":
No symbols found
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols
found
(!!) ATI(0): Invalid horizontal sync pulse timing detected in mode on server
entry.
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
・ディスクが一杯になっていないかdfコマンドで調べる。
debian0:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda1 18848848 2330420 15560956 14% /
tmpfs 63560 0 63560 0% /dev/shm
ディスクにはまだ余裕があるようです。
・dmesgを実行したりsyslogを参照してディスク障害の傾向がないか
を調べる。fsckでyをひたすら叩くことを最近した覚えはありますか。
大変長くて恐縮ですが、dmesgの中身を貼り付けました。お手数ですが、内容見ていただけますでしょうか？
debian0:/var/log# cat dmesg
Linux version 2.4.27-2-686 (horms@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version
3.3.5 (Debian 1:3.3.5-13)) #1 Wed Aug 17 10:34:09 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dd800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007ffec00 (ACPI data)
BIOS-e820: 0000000007ffec00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
IBM machine detected. Enabling interrupts during APM calls.
ACPI: RSDP (v000 PTLTD ) @ 0x000f74c0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x07ff5cbe
ACPI: FADT (v001 IBM TP-X21 0x06040000 0x00000000) @ 0x07ffeb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x07ffebd9
ACPI: DSDT (v001 IBM TP-X21 0x06040000 MSFT 0x0100000c) @ 0x00000000
Kernel command line: root=/dev/hda1 ro
Local APIC disabled by BIOS -- reenabling.
Could not enable APIC!
Initializing CPU#0
Detected 597.416 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1192.75 BogoMIPS
Memory: 122860k/131008k available (1197k kernel code, 7760k reserved, 452k
data, 116k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@xxxxxxxxxxxxx)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Discovered primary peer bus 08 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
PCI: Found IRQ 11 for device 00:0a.1
PCI: Sharing IRQ 11 with 00:0a.0
Redundant entry in serial pci_table. Please send the output of
lspci -vv, this message (115d,000c,8086,2408)
and the manufacturer and name of serial board or modem board
to serial-pci-info@xxxxxxxxxxxxxxxxxxxxxx
register_serial(): autoconfig failed
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@xxxxxx>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4144 blocks [1 disk] into ram disk... done.
Freeing initrd memory: 4144k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 116k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hda: IBM-DJSA-220, ATA DISK drive
blk: queue c8829cc0, I/O limit 4095Mb (mask 0xffffffff)
hdc: MATSHITADVD-ROM SR-8174, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 39070080 sectors (20004 MB) w/1874KiB Cache, CHS=41344/15/63, UDMA(33)
Partition check:
/dev/ide/host0/bus0/target0/lun0: [PTBL] [2432/255/63] p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 385520k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Real Time Clock Driver v1.10f
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xf8000000
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:08.0
PCI: Sharing IRQ 11 with 00:0b.0
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 00:08.1
Yenta ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000006
Yenta ISA IRQ mask 0x06b8, PCI irq 11
Socket status: 30000006
Intel(R) PRO/100 Network Driver - version 2.3.43-k1
Copyright (c) 2004 Intel Corporation
PCI: Found IRQ 11 for device 00:0a.0
PCI: Sharing IRQ 11 with 00:0a.1
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
cpu cycle saver enabled
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
cs4281: version v1.30.32 time 10:50:37 Aug 17 2005
PCI: Found IRQ 11 for device 00:0b.0
PCI: Sharing IRQ 11 with 00:08.0
PCI: Sharing IRQ 11 with 01:00.0
cs4281: Subsystem vendor/id (1014:0183) IRQ 11
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 10:51:33 Aug 17 2005
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:07.2-1, assigned address 2
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:07.2-1.2, assigned address 3
usb.c: USB device 3 (vend/prod 0xf62/0x1001) is not claimed by any active
driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb1:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@xxxxxxx>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
e100: eth0 NIC Link is Up 100 Mbps Full duplex
fsckというコマンド自体を良く知らないのでそれを連打したことはありません。
syslogの結果は別メールで送りますので、確認方法等教えていただけましたら幸いです。(全く解読能力がなくて申し訳ありません)。
・debsums xserver-xfree86 | grep -v OK を実行して結果が空になる
かどうかを調べる。
debian0:/var/log# debsums xserver-xfree86 | grep -v OK
/usr/X11R6/lib/modules/libfb.a
FAILED
・・・何かがうまくいっていないようです。。。
・コンソールでカーネルフレームバッファを使うようなことをして
いますか？たとえば cat /proc/fb を実行すると何か表示されますか。
debian0:/var/log# cat /proc/fb
0 VGA16 VGA
・試しに昔のバージョンに戻してみる。
wget
http://snapshot.debian.net/archive/2005/09/20/debian/pool/main/x/xfree86/xserver-xfree86_4.3.0.dfsg.1-14sarge1_i386.deb
dpkg -i xserver-xfree86_*.deb
上記貼り付け結果を見ていただいてから、解決策が見当たらなかったら昔バージョンに戻そうと思います。
よろしくお願いいたします。
いわした