[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:51750] Re: 有線LANがつながりません
自己レスです。
etchnhalfはインストーラのkernelが2.6.26なのに、インストールされる
kernelが2.6.24なのが原因とのことで、
deb http://www.backports.org/debian etch-backports main contrib non-free
をsources.listに書き加えて、
linux-image-2.6.26-bpo.1-686
をインストールすることで解決しました。
ただし、sources.listに
deb http://www.backports.org/debian etch-backports main contrib non-free
を加えて、apt-get updateを実行すると、NO_PUBKEY ...という警告が
出てしまうので、
wget -O - http://backports.org/debian/archive.key | apt-key add -
を実行しました。
塩路直樹
From: Naoki SHIOJI <shioji@xxxxxxxxxxxxxxxxxx>
Subject: [debian-users:51745] 有線LANがつながりません
Date: Sat, 24 Jan 2009 20:17:01 +0900
> 塩路と申します。debianはpotatoの頃から使っていますが、初心者のままです。
>
> Panasonic CF-R8EW6AJRにdebain-40r6-etchnhalf-i386-netinstoでdebian
> をインストールしました。
> インストール中やレスキューモードで立ち上げたときは、有線LANがつながるのですが、
> 普通に立ち上げたときに、どうやって有線LANにつないだら良いのかわかりません。
>
> 普通に立ち上げたときには、e1000eがロードされていないので、modprobe e1000e
> を実行すると、e1000e自体はロードされるのですが、dmesgにeth0が現れません。
>
> 他に何が足らないのでしょうか?
>
> 普通に立ち上げたときのlsmodの結果とdmesgの結果は次の通りです。
>
> ********************lsmodの結果*********************************************************
> Module Size Used by
> nls_iso8859_1 4224 1
> nls_cp437 5888 1
> vfat 12384 1
> fat 48924 1 vfat
> dm_snapshot 17060 0
> dm_mirror 21792 0
> dm_mod 56004 2 dm_snapshot,dm_mirror
> loop 16996 0
> sg 33360 0
> sr_mod 16740 0
> cdrom 32672 1 sr_mod
> pcmcia 37164 0
> firmware_class 9472 1 pcmcia
> joydev 11424 0
> sdhci 16996 0
> mmc_core 47460 1 sdhci
> video 18832 0
> output 3840 1 video
> yenta_socket 24876 1
> rsrc_nonstatic 12032 1 yenta_socket
> pcmcia_core 37236 3 pcmcia,yenta_socket,rsrc_nonstatic
> snd_hda_intel 274848 0
> battery 13700 0
> tpm_infineon 8808 0
> tpm 15200 1 tpm_infineon
> button 8528 0
> tpm_bios 7040 1 tpm
> snd_pcm 72036 1 snd_hda_intel
> snd_timer 21348 1 snd_pcm
> ac 6212 0
> serio_raw 6788 0
> snd 48772 3 snd_hda_intel,snd_pcm,snd_timer
> soundcore 7680 1 snd
> snd_page_alloc 10184 2 snd_hda_intel,snd_pcm
> pcspkr 3264 0
> i2c_i801 9456 0
> psmouse 36656 0
> evdev 11200 0
> i2c_core 22656 1 i2c_i801
> rtc 13148 0
> ext3 123368 2
> jbd 43892 1 ext3
> mbcache 8480 1 ext3
> usb_storage 77632 0
> sd_mod 27296 5
> ahci 26372 4
> libata 144560 1 ahci
> scsi_mod 141516 5 sg,sr_mod,usb_storage,sd_mod,libata
> ehci_hcd 32556 0
> uhci_hcd 23568 0
> usbcore 127724 4 usb_storage,ehci_hcd,uhci_hcd
> thermal 16092 0
> processor 36840 3 thermal
> fan 4868 0
>
>
> ****************************************************************************************
>
>
> ********************dmesgの結果*********************************************************
> Initializing cgroup subsys cpuset
> Linux version 2.6.24-etchnhalf.1-686 (Debian 2.6.24-6~etchnhalf.7) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Dec 2 07:56:33 UTC 2008
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003b9ba000 (usable)
> BIOS-e820: 000000003b9ba000 - 000000003b9e5000 (ACPI NVS)
> BIOS-e820: 000000003b9e5000 - 000000003b9ff000 (reserved)
> BIOS-e820: 000000003b9ff000 - 000000003ba02000 (ACPI NVS)
> BIOS-e820: 000000003ba02000 - 000000003ba05000 (reserved)
> BIOS-e820: 000000003ba05000 - 000000003ba06000 (ACPI NVS)
> BIOS-e820: 000000003ba06000 - 000000003ba36000 (reserved)
> BIOS-e820: 000000003ba36000 - 000000003ba38000 (ACPI NVS)
> BIOS-e820: 000000003ba38000 - 000000003ba3e000 (reserved)
> BIOS-e820: 000000003ba3e000 - 000000003ba4f000 (ACPI data)
> BIOS-e820: 000000003ba4f000 - 000000003ba69000 (ACPI NVS)
> BIOS-e820: 000000003ba69000 - 000000003ba6b000 (reserved)
> BIOS-e820: 000000003ba6b000 - 000000003ba6d000 (ACPI NVS)
> BIOS-e820: 000000003ba6d000 - 000000003ba8e000 (reserved)
> BIOS-e820: 000000003ba8e000 - 000000003ba94000 (ACPI NVS)
> BIOS-e820: 000000003ba94000 - 000000003bc00000 (usable)
> BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
> BIOS-e820: 00000000ffa80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
> 60MB HIGHMEM available.
> 896MB LOWMEM available.
> Entering add_active_range(0, 0, 244736) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 229376
> HighMem 229376 -> 244736
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 244736
> On node 0 totalpages: 244736
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1760 pages used for memmap
> Normal zone: 223520 pages, LIFO batch:31
> HighMem zone: 120 pages used for memmap
> HighMem zone: 15240 pages, LIFO batch:3
> Movable zone: 0 pages used for memmap
> DMI 2.4 present.
> ACPI: RSDP 000F03B0, 0024 (r2 MATBIO)
> ACPI: XSDT 3BA4DE18, 007C (r1 MATBIO CFR8-1 6222004 MSFT 10013)
> ACPI: FACP 3BA36A98, 00F4 (r4 MATBIO CFR8-1 6222004 MSFT 10013)
> ACPI: DSDT 3BA3E018, D68F (r1 MATBIO CFR8-1 0 INTL 20061109)
> ACPI: FACS 3BA6CD40, 0040
> ACPI: APIC 3BA4CF18, 006C (r2 MATBIO CFR8-1 6222004 MSFT 10013)
> ACPI: ASF! 3BA6CB18, 0063 (r32 INTEL HCG 1 TFSM F4240)
> ACPI: MCFG 3BA6BD18, 003C (r1 A M I GMCH945. 6222004 MSFT 97)
> ACPI: HPET 3BA6BC98, 0038 (r1 A M I ICH7HPET 6222004 AMI. 3)
> ACPI: SLIC 3BA37E18, 0176 (r1 MATBIO CFR8-1 6222004 AMI 10013)
> ACPI: SSDT 3BA05698, 0655 (r1 PmRef CpuPm 3000 INTL 20061109)
> ACPI: SSDT 3BA05D18, 0259 (r1 PmRef Cpu0Tst 3000 INTL 20061109)
> ACPI: SSDT 3BA56A18, 020F (r1 PmRef ApTst 3000 INTL 20061109)
> ACPI: TCPA 3BA6BB98, 0032 (r2 MATBIO CFR8-1 1 MSFT 1000013)
> ACPI: SSDT 3BA05018, 0613 (r1 SataRe SataTabl 1000 INTL 20061109)
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 7:7 APIC version 20
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 7:7 APIC version 20
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x8086a301 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 40000000 (gap: 3bc00000:bc400000)
> swsusp: Registered nosave memory region: 000000000009b000 - 000000000009c000
> swsusp: Registered nosave memory region: 000000000009c000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
> swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 242824
> Kernel command line: root=/dev/sda6 ro quiet
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 1197.070 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 961068k/978944k available (1788k kernel code, 16380k reserved, 716k data, 248k init, 60568k highmem)
> virtual kernel memory layout:
> fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> .init : 0xc0379000 - 0xc03b7000 ( 248 kB)
> .data : 0xc02bf0c9 - 0xc0372384 ( 716 kB)
> .text : 0xc0100000 - 0xc02bf0c9 (1788 kB)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> hpet clockevent registered
> spurious 8259A interrupt: IRQ7.
> Calibrating delay using timer specific routine.. 2401.55 BogoMIPS (lpj=4803106)
> Security Framework initialized
> SELinux: Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000001
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000001
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> CPU0: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> SMP alternatives: switching to SMP code
> Booting processor 1/1 eip 3000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 2394.03 BogoMIPS (lpj=4788073)
> CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001 00000001
> monitor/mwait feature present.
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 3072K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001 00000001
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz stepping 06
> Total of 2 processors activated (4795.58 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> net_namespace: 64 bytes
> Booting paravirtualized kernel on bare hardware
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using MMCONFIG
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: DMI System Vendor: Panasonic Corporation
> ACPI: DMI Product Name: CF-R8EW6AJR
> ACPI: DMI Product Version: 001
> ACPI: DMI Board Name: CFR8-1
> ACPI: DMI BIOS Vendor: American Megatrends Inc.
> ACPI: DMI BIOS Date: 09/05/2008
> ACPI: Please send DMI info above to linux-acpi@xxxxxxxxxxxxxxx
> ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in interrupt mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 64-bit timers, 14318180 Hz
> ACPI: RTC can wake from S4
> Time: tsc clocksource has been installed.
> system 00:01: iomem range 0xcfe00-0xcffff has been reserved
> system 00:01: iomem range 0xd1000-0xd3fff has been reserved
> system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
> system 00:06: ioport range 0x680-0x69f has been reserved
> system 00:06: ioport range 0x1000-0x100f has been reserved
> system 00:06: ioport range 0x1010-0x1013 has been reserved
> system 00:06: ioport range 0xffff-0xffff has been reserved
> system 00:06: ioport range 0x400-0x47f has been reserved
> system 00:06: ioport range 0x500-0x57f has been reserved
> system 00:06: ioport range 0x962-0x962 has been reserved
> system 00:06: ioport range 0x966-0x966 has been reserved
> system 00:0b: iomem range 0xfed1c000-0xfed1ffff could not be reserved
> system 00:0b: iomem range 0xfed10000-0xfed13fff has been reserved
> system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
> system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
> system 00:0b: iomem range 0xf8000000-0xfbffffff could not be reserved
> system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
> system 00:0b: iomem range 0xfeb00000-0xfeb03fff has been reserved
> system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved
> PCI: Bridge: 0000:00:1c.0
> IO window: d000-dfff
> MEM window: f4200000-f55fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.3
> IO window: c000-cfff
> MEM window: f2e00000-f41fffff
> PREFETCH window: disabled.
> PCI: Bus 4, cardbus bridge: 0000:03:00.0
> IO window: 0000a000-0000a0ff
> IO window: 0000a400-0000a4ff
> PREFETCH window: 40000000-43ffffff
> MEM window: 44000000-47ffffff
> PCI: Bridge: 0000:00:1e.0
> IO window: a000-bfff
> MEM window: f0500000-f2dfffff
> PREFETCH window: disabled.
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.3 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 22 (level, low) -> IRQ 18
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> it is
> Freeing initrd memory: 4759k freed
> audit: initializing netlink socket (disabled)
> audit(1232819671.376:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Boot video device is 0000:00:02.0
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.0:pcie00]
> Allocate Port Service[0000:00:1c.0:pcie02]
> Allocate Port Service[0000:00:1c.0:pcie03]
> PCI: Setting latency timer of device 0000:00:1c.3 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.3:pcie00]
> Allocate Port Service[0000:00:1c.3:pcie02]
> Allocate Port Service[0000:00:1c.3:pcie03]
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> hpet_resources: 0xfed00000 is busy
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:K106,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.0.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> cpuidle: using governor ladder
> cpuidle: using governor menu
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> registered taskstats version 1
> Freeing unused kernel memory: 248k freed
> input: AT Translated Set 2 keyboard as /class/input/input0
> ACPI: SSDT 3BA08C98, 0223 (r1 PmRef Cpu0Ist 3000 INTL 20061109)
> ACPI: SSDT 3BA06598, 054F (r1 PmRef Cpu0Cst 3001 INTL 20061109)
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 3BA07E18, 01CF (r1 PmRef ApIst 3000 INTL 20061109)
> ACPI: SSDT 3BA08F18, 008D (r1 PmRef ApCst 3000 INTL 20061109)
> Marking TSC unstable due to: TSC halts in idle.
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
> Time: hpet clocksource has been installed.
> ACPI: Thermal Zone [TZ00] (51 C)
> ACPI: Thermal Zone [TZ01] (48 C)
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1a.0 to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000e0e0
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:1a.1 to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1a.1: irq 20, io base 0x0000e0c0
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e0a0
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> SCSI subsystem initialized
> libata version 3.00 loaded.
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e080
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000e060
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000e040
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> ahci 0000:00:1f.2: version 3.0
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 1.5 Gbps 0x33 impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 abar m2048@0xf5625000 port 0xf5625100 irq 221
> ata2: SATA max UDMA/133 abar m2048@0xf5625000 port 0xf5625180 irq 221
> ata3: DUMMY
> ata4: DUMMY
> ata5: SATA max UDMA/133 abar m2048@0xf5625000 port 0xf5625300 irq 221
> ata6: SATA max UDMA/133 abar m2048@0xf5625000 port 0xf5625380 irq 221
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-8: TOSHIBA MK1252GSX, LV010G, max UDMA/100
> ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
> Clocksource tsc unstable (delta = -177989219 ns)
> ata1.00: configured for UDMA/100
> ata2: SATA link down (SStatus 0 SControl 300)
> ata5: SATA link down (SStatus 4 SControl 300)
> ata6: SATA link down (SStatus 4 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1252GS LV01 PQ: 0 ANSI: 5
> ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 19 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1a.7 to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
> ehci_hcd 0000:00:1a.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1a.7
> ehci_hcd 0000:00:1a.7: irq 17, io mem 0xf5625c00
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 4 ports detected
> Driver 'sd' needs updating - please use bus_type methods
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 <<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 21, io mem 0xf5625800
> sda5<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb8: configuration #1 chosen from 1 choice
> hub 8-0:1.0: USB hub found
> hub 8-0:1.0: 8 ports detected
> sda6 sda7 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> usb 8-2: new high speed USB device using ehci_hcd and address 2
> usb 8-2: configuration #1 chosen from 1 choice
> Initializing USB Mass Storage driver...
> scsi6 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> Attempting manual resume
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Real Time Clock Driver v1.12ac
> ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 17
> input: PC Speaker as /class/input/input1
> ACPI: AC Adapter [AC] (off-line)
> input: Power Button (FF) as /class/input/input2
> tpm_inf_pnp 00:0a: Found TPM with ID IFX0102
> tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x920, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
> ACPI: Power Button (FF) [PWRF]
> input: Lid Switch as /class/input/input3
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ACPI: Lid Switch [LID]
> input: Power Button (CM) as /class/input/input4
> ACPI: Power Button (CM) [PWRB]
> ACPI: Battery Slot [BAT1] (battery present)
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x39a0b2, caps: 0xa04751/0x200000
> input: SynPS/2 Synaptics TouchPad as /class/input/input5
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> input: Video Bus as /class/input/input6
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> Yenta: CardBus bridge found at 0000:03:00.0 [10f7:8338]
> Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
> Socket status: 30000006
> Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
> pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
> cs: IO port probe 0xa000-0xbfff: clean.
> pcmcia: parent PCI bridge Memory window: 0xf0500000 - 0xf2dfffff
> sdhci: SDHCI controller found at 0000:03:00.2 [1180:0822] (rev 21)
> ACPI: PCI Interrupt 0000:03:00.2[C] -> GSI 23 (level, low) -> IRQ 21
> mmc0: SDHCI at 0xf2d01000 irq 21 DMA
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0xc00-0xcf7: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> usb-storage: device scan complete
> scsi 6:0:0:0: CD-ROM GENERIC CDRCB03 1.03 PQ: 0 ANSI: 0
> Adding 1269092k swap on /dev/sda5. Priority:-1 extents:1 across:1269092k
> Driver 'sr' needs updating - please use bus_type methods
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 6:0:0:0: Attached scsi CD-ROM sr0
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 6:0:0:0: Attached scsi generic sg1 type 5
> EXT3 FS on sda6, internal journal
> loop: module loaded
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
>
> ****************************************************************************************
>
>
> 宜しくお願い致します。
>
> 塩路直樹
>
>
>