[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:04179] Re: How To Write ppp
慎＠未来ネットです。
このメールが届いたと言うことはまだできていません。^^;;
> プロバイダはドリームネットです。
うちのプロバイダは未来ネットです。依然、受付の人に
私 「そちらは,PAPで、いいんですか」
受付「ええ、そうしてください」
といわれました。余談ですが。
そこで、どうしてつながらないかが分からないので
/var/log/ppp.log
Feb 8 10:51:47 linger chat[245]: ATDTxxx-xxx-xxxx^M^M
Feb 8 10:51:47 linger chat[245]: CONNECT -- got it
Feb 8 10:51:47 linger chat[245]: send (^M)
Feb 8 10:51:47 linger pppd[244]: Serial connection established.
Feb 8 10:51:48 linger pppd[244]: Using interface ppp0
Feb 8 10:51:48 linger pppd[244]: Connect: ppp0 <--> /dev/ttyS0
Feb 8 10:51:51 linger pppd[244]: Hangup (SIGHUP)
Feb 8 10:51:51 linger pppd[244]: Modem hangup
Feb 8 10:51:51 linger pppd[244]: Connection terminated.
Feb 8 10:51:51 linger pppd[244]: Exit.
Feb 8 10:52:20 linger pppd[250]: pppd 2.2.0 started by root, uid 0
Feb 8 10:52:21 linger chat[251]: abort on (BUSY)
Feb 8 10:52:21 linger chat[251]: abort on (NO CARRIER)
Feb 8 10:52:21 linger chat[251]: abort on (VOICE)
Feb 8 10:52:21 linger chat[251]: abort on (NO DIALTONE)
Feb 8 10:52:21 linger chat[251]: send (ATZ^M)
Feb 8 10:52:21 linger chat[251]: expect (OK)
Feb 8 10:52:21 linger chat[251]: ATZ^M^M
Feb 8 10:52:21 linger chat[251]: OK -- got it
Feb 8 10:52:21 linger chat[251]: send (AT$N1=1^M)
Feb 8 10:52:21 linger chat[251]: expect (OK)
Feb 8 10:52:21 linger chat[251]: ^M
Feb 8 10:52:21 linger chat[251]: AT$N1=1^M^M
Feb 8 10:52:21 linger chat[251]: OK -- got it
Feb 8 10:52:21 linger chat[251]: send (ATDTxxx-xxx-xxxx^M)
Feb 8 10:52:21 linger chat[251]: expect (CONNECT)
Feb 8 10:52:21 linger chat[251]: ^M
Feb 8 10:52:23 linger chat[251]: ATDTxxx-xxx-xxxx^M^M
Feb 8 10:52:23 linger chat[251]: CONNECT -- got it
Feb 8 10:52:23 linger chat[251]: send (^M)
Feb 8 10:52:23 linger pppd[250]: Serial connection established.
Feb 8 10:52:24 linger pppd[250]: Using interface ppp0
Feb 8 10:52:24 linger pppd[250]: Connect: ppp0 <--> /dev/ttyS0
Feb 8 10:52:27 linger pppd[250]: Hangup (SIGHUP)
Feb 8 10:52:27 linger pppd[250]: Modem hangup
Feb 8 10:52:27 linger pppd[250]: Connection terminated.
Feb 8 10:52:27 linger pppd[250]: Exit.
/etc/ppp/options
# /etc/ppp/options
#
# $Id: options,v 1.4 1996/05/01 18:57:04 alvar Exp $
#
# Originally created by Jim Knoble <jmknoble@xxxxxxxxxxxxxxxxxxxxx>
# Modified for Debian by alvar Bray <alvar@xxxxxxxxxxx>
# Modified for PPP Server setup by Christoph Lameter <clameter@debian.org>
#
# Use the command egrep -v '#|^ *$' /etc/ppp/options to quickly see what
# options are active in this file.
# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
# Two Servers can be remotely configured
# dns-addr 192.168.1.1
# dns-addr 192.168.1.2
# Specify which WINS Servers the incoming connection Win95 or WinNT should use
# wins-addr 192.168.1.50
# wins-addr 192.168.1.51
# Run the executable or shell command specified after pppd has
# terminated the link. This script could, for example, issue commands
# to the modem to cause it to hang up if hardware modem control signals
# were not available.
#disconnect "chat -- \d+++\d\c OK ath0 OK"
# async character map -- 32-bit hex; each bit is a character
# that needs to be escaped for pppd to receive it. 0x00000001
# represents '\x01', and 0x80000000 represents '\x1f'.
asyncmap 0
# Require the peer to authenticate itself before allowing network
# packets to be sent or received.
# For a PPP Server with script based logins not using PAP or CHAP
# you need to disable this setting.
# auth
# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
# on the serial port.
crtscts
# Use software flow control (i.e. XON/XOFF) to control the flow of data
# on the serial port.
#xonxoff
# Specifies that certain characters should be escaped on transmission
# (regardless of whether the peer requests them to be escaped with its
# async control character map). The characters to be escaped are
# specified as a list of hex numbers separated by commas. Note that
# almost any character can be specified for the escape option, unlike
# the asyncmap option which only allows control characters to be
# specified. The characters which may not be escaped are those with hex
# values 0x20 - 0x3f or 0x5e.
#escape 11,13,ff
# Don't use the modem control lines.
#local
# Specifies that pppd should use a UUCP-style lock on the serial device
# to ensure exclusive access to the device.
lock
# Use the modem control lines. On Ultrix, this option implies hardware
# flow control, as for the crtscts option. (This option is not fully
# implemented.)
modem
# Set the MRU [Maximum Receive Unit] value to <n> for negotiation. pppd
# will ask the peer to send packets of no more than <n> bytes. The
# minimum MRU value is 128. The default MRU value is 1500. A value of
# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
# bytes of data).
#mru 542
# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
# notation (e.g. 255.255.255.0).
#netmask 255.255.255.0
# Disables the default behaviour when no local IP address is specified,
# which is to determine (if possible) the local IP address from the
# hostname. With this option, the peer will have to supply the local IP
# address during IPCP negotiation (unless it specified explicitly on the
# command line or in an options file).
#noipdefault
# Enables the "passive" option in the LCP. With this option, pppd will
# attempt to initiate a connection; if no reply is received from the
# peer, pppd will then just wait passively for a valid LCP packet from
# the peer (instead of exiting, as it does without this option).
#passive
# With this option, pppd will not transmit LCP packets to initiate a
# connection until a valid LCP packet is received from the peer (as for
# the "passive" option with old versions of pppd).
#silent
# Don't request or allow negotiation of any options for LCP and IPCP
# (use default values).
#-all
# Disable Address/Control compression negotiation (use default, i.e.
# address/control field disabled).
#-ac
# Disable asyncmap negotiation (use the default asyncmap, i.e. escape
# all control characters).
#-am
# Don't fork to become a background process (otherwise pppd will do so
# if a serial device is specified).
#-detach
# Disable IP address negotiation (with this option, the remote IP
# address must be specified with an option on the command line or in an
# options file).
#-ip
# Disable magic number negotiation. With this option, pppd cannot
# detect a looped-back line.
#-mn
# Disable MRU [Maximum Receive Unit] negotiation (use default, i.e.
# 1500).
#-mru
# Disable protocol field compression negotiation (use default, i.e.
# protocol field compression disabled).
#-pc
# Require the peer to authenticate itself using PAP.
#+pap
# Don't agree to authenticate using PAP.
#-pap
# Require the peer to authenticate itself using CHAP [Cryptographic
# Handshake Authentication Protocol] authentication.
#+chap
# Don't agree to authenticate using CHAP.
#-chap
# Disable negotiation of Van Jacobson style IP header compression (use
# default, i.e. no compression).
#-vj
# Increase debugging level (same as -d). If this option is given, pppd
# will log the contents of all control packets sent or received in a
# readable form. The packets are logged through syslog with facility
# daemon and level debug. This information can be directed to a file by
# setting up /etc/syslog.conf appropriately (see syslog.conf(5)). (If
# pppd is compiled with extra debugging enabled, it will log messages
# using facility local2 instead of daemon).
#debug
# Append the domain name <d> to the local host name for authentication
# purposes. For example, if gethostname() returns the name porsche,
# but the fully qualified domain name is porsche.Quotron.COM, you would
# use the domain option to set the domain name to Quotron.COM.
#domain <d>
# Enable debugging code in the kernel-level PPP driver. The argument n
# is a number which is the sum of the following values: 1 to enable
# general debug messages, 2 to request that the contents of received
# packets be printed, and 4 to request that the contents of transmitted
# packets be printed.
#kdebug n
# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
# requests a smaller value via MRU negotiation, pppd will request that
# the kernel networking code send data packets of no more than n bytes
# through the PPP network interface.
#mtu <n>
# Enforce the use of the hostname as the name of the local system for
# authentication purposes (overrides the name option).
#usehostname
# Set the assumed name of the remote system for authentication purposes
# to <n>.
#remotename <n>
# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.
proxyarp
# Use the system password database for authenticating the peer using
# PAP. Note: mgetty already provides this option. If this is specified
# then dialin from users using a script under Linux to fire up ppp wont work.
# login
# If this option is given, pppd will send an LCP echo-request frame to
# the peer every n seconds. Under Linux, the echo-request is sent when
# no packets have been received from the peer for n seconds. Normally
# the peer should respond to the echo-request by sending an echo-reply.
# This option can be used with the lcp-echo-failure option to detect
# that the peer is no longer connected.
lcp-echo-interval 30
# If this option is given, pppd will presume the peer to be dead if n
# LCP echo-requests are sent without receiving a valid LCP echo-reply.
# If this happens, pppd will terminate the connection. Use of this
# option requires a non-zero value for the lcp-echo-interval parameter.
# This option can be used to enable pppd to terminate after the physical
# connection has been broken (e.g., the modem has hung up) in
# situations where no hardware modem control lines are available.
lcp-echo-failure 4
# Set the LCP restart interval (retransmission timeout) to <n> seconds
# (default 3).
#lcp-restart <n>
# Set the maximum number of LCP terminate-request transmissions to <n>
# (default 3).
#lcp-max-terminate <n>
# Set the maximum number of LCP configure-request transmissions to <n>
# (default 10).
#lcp-max-configure <n>
# Set the maximum number of LCP configure-NAKs returned before starting
# to send configure-Rejects instead to <n> (default 10).
#lcp-max-failure <n>
# Set the IPCP restart interval (retransmission timeout) to <n>
# seconds (default 3).
#ipcp-restart <n>
# Set the maximum number of IPCP terminate-request transmissions to <n>
# (default 3).
#ipcp-max-terminate <n>
# Set the maximum number of IPCP configure-request transmissions to <n>
# (default 10).
#ipcp-max-configure <n>
# Set the maximum number of IPCP configure-NAKs returned before starting
# to send configure-Rejects instead to <n> (default 10).
#ipcp-max-failure <n>
# Set the PAP restart interval (retransmission timeout) to <n> seconds
# (default 3).
#pap-restart <n>
# Set the maximum number of PAP authenticate-request transmissions to
# <n> (default 10).
#pap-max-authreq <n>
# Set the CHAP restart interval (retransmission timeout for
# challenges) to <n> seconds (default 3).
#chap-restart <n>
# Set the maximum number of CHAP challenge transmissions to <n>
# (default 10).
#chap-max-challenge
# If this option is given, pppd will rechallenge the peer every <n>
# seconds.
#chap-interval <n>
# With this option, pppd will accept the peer's idea of our local IP
# address, even if the local IP address was specified in an option.
#ipcp-accept-local
# With this option, pppd will accept the peer's idea of its (remote) IP
# address, even if the remote IP address was specified in an option.
#ipcp-accept-remote
/etc/pap-secrets
xxx * xxxx
/etc/ppp.chatscript
ABORT BUSY
ABORT "NO CARRIER"
ABORT VOICE
ABORT "NO DIALTONE"
"" ATZ
OK AT$N1=1
OK ATDTxxx-xxx-xxxx
CONNECT ""
/etc/ppp
defaultroute /dev/ttyS0 38400 user 0
を貼りつけておきます。よろしくおねがいします。