[debian-users:29134] mtrr & cs4281

[Inoue Takahiko <blue_breaker@xxxxxxxxx>]

井上です

御無沙汰していましたが、sidもwanderlustもうまくいきました
様々な御指摘ありがとうございます

web上でmtrrに関する記事を読んで挑戦中なのですが、よく分かりません

The -bpp option is no longer supported.
	Use -depth to set the color depth, and use -fbbpp if you really
	need to force a non-default framebuffer (hardware) pixel format.

XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.19 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Mon Jul  9 23:56:07 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "jp106"
(**) XKB: layout: "jp"
(**) XKB: options: "ctrl:swapcaps"
(**) |-->Input Device "Configured Mouse"
(**) FontPath set to "unix/:7110"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 3

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Mach64 LM rev 100, Mem @ 0xf5000000/24, 0xf4100000/12, I/O @ 0x2000/8
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 6.2.3
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) ATI: ATI driver (version 6.2.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
	ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (AGP),
	ATI Rage 128 Pro PF (AGP), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
	ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP)
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 6.2.3
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(WW) ATI(0): Bad V_BIOS checksum
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE DDC supported
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected;  block I/O base is 0x2000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using Mach64 accelerator CRTC.
(--) ATI(0): 1024x768 panel (ID 1) detected.
(--) ATI(0): Panel model IBM XGA.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): Using digital flat panel interface.
(II) ATI(0): Using 8 MB linear aperture at 0xF5000000.
(II) ATI(0): Using Block 0 MMIO aperture at 0xF4100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xF4100000.
(==) ATI(0): Write-combining range (0xf5000000,0x400000)
(II) ATI(0): MMIO write caching enabled.
(--) ATI(0): 4096 kB of SGRAM (2:1) 32-bit detected.
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): Maximum clock: 230.00 MHz
(WW) ATI(0): Default mode "1152x864" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1280x960" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1280x960" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1280x1024" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1280x1024" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1280x1024" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1600x1200" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1600x1200" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1600x1200" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1600x1200" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1600x1200" deleted (exceeds panel dimensions)
(WW) ATI(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) ATI(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) ATI(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) ATI(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) ATI(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) ATI(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(--) ATI(0): Virtual size is 1024x768 (pitch 1024)
(**) ATI(0): Default mode "1024x768": 65.1 MHz, 49.7 kHz, 62.7 Hz
(**) ATI(0): Default mode "800x600": 65.1 MHz, 49.7 kHz, 63.1 Hz
(**) ATI(0): Default mode "640x480": 65.1 MHz, 50.9 kHz, 63.5 Hz
(==) ATI(0): DPI set to (75, 75)
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libcfb16.a
(II) Module cfb16: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libcfb.a
(II) Module cfb: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libmfb.a
(II) Module mfb: vendor="The XFree86 Project"
	compiled for 4.0.3, module version = 1.0.0
(==) ATI(0): Write-combining range (0xf5000000,0x400000)
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		12 256x256 slots
(==) ATI(0): Backing store disabled
(**) ATI(0): DPMS enabled
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Configured Mouse: Protocol: "PS/2"
(**) Configured Mouse: Core Pointer
(==) Configured Mouse: Buttons: 3
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)

の様になっているのですが、どこがRageのメモリー情報なのでしょう?
mtrrで設定に使う部分が分かりません

後、cs4281をALSAで使いたのですが、どう設定すれば良いのでしょう?
色々な記事を見て挑戦中なのですが…

kernelではSoundCardを使う様にだけ設定してます
alsa-confは手動で書き換えています
 
/etc/init.d/alsa start とすると

 Starting ALSA sound driver (version none): no driver installed

のようになります。

誰か解決法を教えていただけませんでしょうか?
宜しくお願いします。

長いメールですいません
-- 
---------------
>>Inoue Takahiko
>>E-mail:blue_breaker@xxxxxxxx