[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[debian-users:47245] 自動電源 OFF しない on VAIO
さいとうと申します。どうか宜しくお願いします。
まず、長文になってしまい大変失礼します。
sargeを使用しています。カーネルを2.6系（#apt-get install
kernel-image-2.6-k7
）にすると
シャットダウン時に
：
Shutdown: hdc
と表示された後にモニタが真っ暗になり
PC本体の（分かる範囲ではモニタ、ファン）電源が自動的に落
ちなくなってしまいました
sargeデフォルトの2.4系カーネルでは自動的に電源OFFにな
ったのでなんとかしたい…
http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt
http://debian.fam.cx/index.php?cmd=read&page=Software%2FLinuxKernel#content_1_4
↑で調べているとACPIが怪しいと分かり/boot/grub/menu.lst
に
---------------------------------------------------------------------
…（省略）…
title Debian GNU/Linux, kernel 2.6.8-3-k7
root (hd0,1)
kernel /boot/vmlinuz-2.6.8-3-k7 root=/dev/hda2 ro
acpi=force apm=off
initrd /boot/initrd.img-2.6.8-3-k7
savedefault
boot
…（省略）…
---------------------------------------------------------------------
としたんですが、改善しません。
他にも acpi=on apm=off とか acpi=off apm=on とかもダメで
した。最後の方では自分でもオプションの意味が分からずに使
っていました…
BIOS は ACPI に対応しているようです
他に試行錯誤したことは
# apt-get install acpi acpid とか
# lsmod して battery ac processor button fan thermal の
モジュールが
ロードされている事を確かめたり
メーリスのアーカイブで探したんですが、力不足か
ttp://lists.debian.or.jp/debian-users/200310/msg00154.html
辺りぐらいしか見つかりませんでした。
# modprobe ospm_system するも
FATAL: Module ospm_system not found. と文句を言われる。
。
VAIO が ASUS をマザーボードに採用していると知り、
# modprobe asus_acpi
としましたが、挙動は変わりませんでした。
どなたか解決法をご教授頂けませんでしょうか？
使用しているPCはVAIOのPCG-FX55Z/BPです↓
http://www.sony.jp/products/Consumer/PCOM/PCG-FX77Z/spec.html
以下に2.6系（電源が落ちない）の dmesg を示します
本文サイズの巨大化どうかご容赦下さい。。
--------------------------------------------------------------------------------------------------------------------------
Linux version 2.6.8-3-k7 (root@lart) (gcc version 3.3.5
(Debian 1:3.3.5-13)) #1 Sat Jul 15 09:58:38 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fef0000 (usable)
BIOS-e820: 000000000fef0000 - 000000000feff000 (ACPI
data)
BIOS-e820: 000000000feff000 - 000000000ff00000 (ACPI NVS)
BIOS-e820: 000000000ff00000 - 0000000010000000 (usable)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
256MB LOWMEM available.
On node 0 totalpages: 65536
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61440 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD
) @ 0x000f7700
ACPI: RSDT (v001 SONY K5 0x06040000 LTP
0x00000000) @ 0x0fef9d89
ACPI: FADT (v001 SONY K5 0x06040000 PTL_
0x000f4240) @ 0x0fefee4c
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP
0x00000001) @ 0x0fefeec0
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP
0x00000001) @ 0x0fefeee8
ACPI: DSDT (v001 SONY K5 0x06040000 MSFT
0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro acpi=force apm=off
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1100.336 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
Memory: 251740k/262144k available (1537k kernel code,
9596k reserved, 696k data, 152k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay loop... 2179.07 BogoMIPS
Security Scaffold v1.0.0 initialized
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff
00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff
00000000 00000420
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD mobile AMD Duron(tm) stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1099.0907 MHz.
..... host bus clock speed is 199.0983 MHz.
checking if image is initramfs...it isn't (ungzip failed);
looks like an initrd
Freeing initrd memory: 4468k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd7cd, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
ACPI: Embedded Controller [EC0] (gpe 1)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PPB_._PRT]
ACPI: Power Resource [PCR0] (off)
ACPI: Power Resource [PCR1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at
0xc00f7760
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaad2, dseg
0x400
PNPBIOS fault.. attempting recovery.
PnPBIOS: Warning! Your PnP BIOS caused a fatal error.
Attempting to continue
PnPBIOS: You may need to reboot with the "nobiospnp"
option to operate stably
PnPBIOS: Check with your vendor for an updated BIOS
PnPBIOS: dev_node_info: unexpected status 0x28
PnPBIOS: Unable to get node info. Aborting.
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 5 (level, low)
-> IRQ 5
ACPI: PCI interrupt 0000:00:07.6[C] -> GSI 5 (level, low)
-> IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:0a.1[B] -> GSI 10 (level, low)
-> IRQ 10
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 9 (level, low)
-> IRQ 9
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low)
-> IRQ 10
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low)
-> IRQ 5
Simple Boot Flag at 0x37 set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@xxxxxxxxxxxxx)
devfs: boot_options: 0x0
Initializing Cryptographic API
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
spurious 8259A interrupt: IRQ7.
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size
1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4468 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on
pci0000:00:07.1
ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA,
hdb:pio
ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA,
hdd:pio
hda: HITACHI_DK23DA-30, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB) w/2048KiB Cache,
CHS=58140/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 240932k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache,
UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PS/2 Generic Mouse on isa0060/serio1
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling
states)
powernow: PowerNOW! Technology present. Can scale:
frequency and voltage.
powernow: FSB: 100.030 MHz
powernow: Found PSB header at c00f74d0
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 28 PST tables. (Only dumping ones relevant
to this CPU).
powernow: PST:9 (@c00f757a)
powernow: cpuid: 0x762 fsb: 100 maxFID: 0x0 startvid: 0xc
powernow: FID: 0x4 (5.0x [500MHz]) VID: 0x13 (1.200V)
powernow: FID: 0x6 (6.0x [600MHz]) VID: 0x13 (1.200V)
powernow: FID: 0x8 (7.0x [700MHz]) VID: 0x11 (1.250V)
powernow: FID: 0xc (9.0x [900MHz]) VID: 0xd (1.350V)
powernow: FID: 0x0 (11.0x [1100MHz]) VID: 0xc (1.400V)
powernow: SGTC: 10000
powernow: Minimum speed 500 MHz. Maximum speed 1100 MHz.
Capability LSM initialized
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.100 (c) Dave Jones
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
parport_pc: VIA parallel port: io=0x378, irq=7
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 9 (level, low)
-> IRQ 9
Yenta: CardBus bridge found at 0000:00:0a.0 [104d:80f6]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1222, devctl
0x66
Yenta: ISA IRQ mask 0x0808, PCI irq 9
Socket status: 30000006
ACPI: PCI interrupt 0000:00:0a.1[B] -> GSI 10 (level, low)
-> IRQ 10
Yenta: CardBus bridge found at 0000:00:0a.1 [104d:80f6]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1222, devctl
0x66
Yenta: ISA IRQ mask 0x0808, PCI irq 10
Socket status: 30000006
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low)
-> IRQ 10
eth0: RealTek RTL8139 at 0x1800, 08:00:46:6e:27:50, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 5 (level, low)
-> IRQ 5
PCI: Setting latency timer of device 0000:00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ADS72 (Analog Devices
AD1881A)
via82cxxx: board #1 at 0x1000, IRQ 5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low)
-> IRQ 9
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx
UHCI USB 1.1 Controller
PCI: Setting latency timer of device 0000:00:07.2 to 64
uhci_hcd 0000:00:07.2: irq 9, io base 00001c00
uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low)
-> IRQ 9
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx
UHCI USB 1.1 Controller (#2)
PCI: Setting latency timer of device 0000:00:07.3 to 64
uhci_hcd 0000:00:07.3: irq 9, io base 00001c20
uhci_hcd 0000:00:07.3: new USB bus registered, assigned
bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Mouse [ELECOM ELECOM USB Mouse with
Wheel] on usb-0000:00:07.2-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 204M
agpgart: AGP aperture is 128M @ 0xf0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version:
0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 9 (level, low)
-> IRQ 9
PCI: Setting latency timer of device 0000:00:0e.0 to 64
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9]
MMIO=[e8004000-e80047ff] Max Packet=[2048]
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
ieee1394: Host added: ID:BUS[0-00:1023]
GUID[08004603012f3701]
ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
NET: Registered protocol family 17
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.PIB_.EC0_._Q20] (Node cfe83260),
AE_AML_UNINITIALIZED_LOCAL
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: AC Adapter [ACAD] (off-line)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
ACPI: Lid Switch [LID]
ACPI: Thermal Zone [THRM] (55 C)
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02fc1a0(lo)
IPv6 over IPv4 tunneling driver
cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: no IPv6 routers present
--------------------------------------------------------------------------------------------------------------------------
--------------------------------------
[10th Anniversary] special auction campaign now!
http://pr.mail.yahoo.co.jp/auction/