[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[debian-users:28506] Re: GLint-XL and XFree86 4.0.3 (Re: Re: XFree86 for "Unknown Device")



At Thu, 24 May 2001 21:20:02 +0900,
KISE Hiroshi wrote:
> とりあえず、/etc/X11/XF86Config-4と/var/log/XFree86.0.logを
> 添付しておきます。logはgzipしてます。
> -- 
> Section "Module"
> 	Load  "xie"
> 	Load  "pex5"
> 	Load  "glx"
> 	Load  "dri"
> 	Load  "dbe"
> 	Load  "record"
> 	Load  "extmod"
> 	Load  "type1"
> EndSection

水上です。。。

的はずれでしょうが、
        Load    "ddc"
        Load    "GLcore"
        Load    "int10"
なんかはいらないのでしょうか?
それとも今はGLは外しておられるのでしょうか。

ちなみに、こちらはOxygen-GVX210でGLINT_R3+gamma_G2なのですが、

(II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v,
        pm2, pm, 300sx, 500tx, mx
(II) Primary Device is: PCI 01:00:1
(WW) GLINT: No matching Device section for instance (BusID PCI:1:0:0) found
(--) Assigning device section with no busID to primary device
(WW) GLINT: No matching Device section for instance (BusID PCI:1:0:2) found
(--) Chipset pm3 found
       :
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) GLINT(0): Initializing int10
(II) GLINT(0): Primary V_BIOS segment is: 0xc000 
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm3" 
(==) GLINT(0): Not trying to use Gamma with Permedia 3.
(--) GLINT(0): No free Gamma chip was found.
(==) GLINT(0): Linear framebuffer at 0xB4000000
(==) GLINT(0): MMIO registers at 0xC1020000
(II) GLINT(0): Unknown Glint Permedia3 board detected.
        subsysVendor = 0x3d3d, subsysCard = 0x0136.
        Let's hope that it is correctly initialized by the bios.
(==) GLINT(0): Write-combining range (0xb4000000,0x100000)
(==) GLINT(0): Write-combining range (0xb4000000,0x200000)
       :
(==) GLINT(0): Write-combining range (0xb4000000,0x2000000)
(==) GLINT(0): Write-combining range (0xb4000000,0x2000000)
(==) GLINT(0): VideoRAM: 32768 kByte

pm3として認識しています。
GLは遅いです。とっても高い買物です。
pm2と比較すると、めっちゃキレイな表示なのでマアいいか。

しくしく...といった感じでしょうか。ばかですね。^^;


<mailto: mizukami@xxxxxxxxxxxxxxxxx>