[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[debian-users:51025] Re: インストーラのテスト協力のご案内(Re: Shuttle SG33G5(Intel G33)へのインストールについて



やまだです。

コメントがなかったので致命的な問題はないと信じつつ(汗)、
レポートを書き直してみました。これで今晩あたり送付して
みようと思います。

1通目は9/21版のDailyビルドで問題が起きなかったもの。
2通目は9/15版のWeeklyビルドでインストーラが問題を
起こしたもの。

9/22版のWeeklyビルドは今朝ようやくダウンロードが
終わったところなので、今晩あたりテストする予定です。

----1通目ここから
Package: installation-reports

Boot method: CD
Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 21-Sep-2008 11:37

Machine: Shuttle SG33G5
Processor: Intel Core 2 Quad Q6600
Memory: 4096MB
Partitions:

/dev/sda1     ext3   305054196   3565480 285992824   2% /
tmpfs        tmpfs     1680004         0   1680004   0% /lib/init/rw
udev         tmpfs       10240        92     10148   1% /dev
tmpfs        tmpfs     1680004         0   1680004   0% /dev/shm
/dev/sdb1     vfat      127456    126566       890 100% /media/disk

Output of lspci -knn (or lspci -nn):

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31
Express DRAM Controller [8086:29c0] (rev 02)
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31
Express Integrated Graphics Controller [8086:29c2] (rev 02)
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express
Integrated Graphics Controller [8086:29c3] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 02)
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 02)
	Kernel driver in use: HDA Intel
	Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 02)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 2 [8086:2942] (rev 02)
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 02)
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IH (ICH9DH) LPC
Interface Controller [8086:2912] (rev 02)
	Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH
(ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02)
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 02)
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2
port SATA IDE Controller [8086:2926] (rev 02)
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix
01:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE
controller [197b:2368]
	Kernel driver in use: JMicron IDE
	Kernel modules: jmicron
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
	Kernel driver in use: sky2
	Kernel modules: sky2
03:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
	Kernel driver in use: ohci1394
	Kernel modules: ohci1394

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [O]
Detect network card:    [O]
Configure network:      [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Install base system:    [O]
Clock/timezone setup:   [O]
User/password setup:    [O]
Install tasks:          [O]
Install boot loader:    [O]
Overall install:        [O]

Comments/Problems:
No probelm.


System Information:
Barebone: Shuttle SG33G5
CPU: Intel Core 2 Quad Q6600
CHIPSET: Intel G33 + ICH9DH
MEMORY: 4096MB
VGA: Built-in Intel GMA 3100
AUDIO: Realtek ALC888DD
ETHERNET: Marvell 88E8056
IEEE1394 (FireWire): TI TSB43AB22A
STORAGE INTERFACE: 3.0Gb/s bandwidth SATA II, 3.0Gb/s bandwidth eSATA,
    Ultra DMA/100 IDE channel, Floppy
HDD: Hitachi HDP725032GLA360 (SATA)
OPTICAL DRIVE: HL-DT-ST GSA-4167B (ATAPI)

Ref: http://www.shuttle-japan.jp/Product/sg33g5/sg33g5spec.htm?PI=635
----1通目ここまで

----2通目ここから
Package: installation-reports

Boot method: CD
Image version: http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-CD-1.iso
Date: 15-Sep-2008 13:27

Machine: Shuttle SG33G5
Processor: Intel Core 2 Quad Q6600
Memory: 4096MB
Partitions:

Output of lspci -knn (or lspci -nn):

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot:           [E]
Detect network card:    [ ]
Configure network:      [ ]
Detect CD:              [ ]
Load installer modules: [ ]
Detect hard drives:     [ ]
Partition hard drives:  [ ]
Install base system:    [ ]
Clock/timezone setup:   [ ]
User/password setup:    [ ]
Install tasks:          [ ]
Install boot loader:    [ ]
Overall install:        [ ]

Comments/Problems:
Installer doesn't start with host bus error on Shuttle SG33G5 (Intel
G33 chipset).

Loading /install.386/vmlinuz..........................
Loading /install.386/initrd.gz..................................................
..................ready.
Uncompressing Linux... OK. booting the kernel.
irq 19: nobody cared (try booting with the "irqpoll" option)
handlers:
[<f885de30>] (usb_hcd_irq+0x0/0x4d [usbcore])
[<fii5de30>] (usb_hdc_irq+0x0/0x4d [usbcore])
Disabling IRQ #19
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dna 4086 in
ata1.00: status: { DRDY }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dna 4086 in
ata1.00: status: { DRDY }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dna 4086 in
ata1.00: status: { DRDY }

image: http://image.blog.livedoor.jp/tyamada22/imgs/2/9/29baf43d.JPG


System Information:
Barebone: Shuttle SG33G5
CPU: Intel Core 2 Quad Q6600
CHIPSET: Intel G33 + ICH9DH
MEMORY: 4096MB
VGA: Built-in Intel GMA 3100
AUDIO: Realtek ALC888DD
ETHERNET: Marvell 88E8056
IEEE1394 (FireWire): TI TSB43AB22A
STORAGE INTERFACE: 3.0Gb/s bandwidth SATA II, 3.0Gb/s bandwidth eSATA,
    Ultra DMA/100 IDE channel, Floppy
HDD: Hitachi HDP725032GLA360 (SATA)
OPTICAL DRIVE: HL-DT-ST GSA-4167B (ATAPI)

Ref: http://www.shuttle-japan.jp/Product/sg33g5/sg33g5spec.htm?PI=635
----2通目ここまで


2008/09/22 1:15 Takuma Yamada <tyamada@xxxxxxxxxxxxxxxx>:
> やまだです。
>
> 2008/09/18 21:30 Hideki Yamane <henrich@debian.or.jp>:
>> On Thu, 18 Sep 2008 10:39:29 +0900
>> ちょうどインストーラーのテスト協力依頼メールが来ていましたので簡単に
>> ご案内。
>>
>> ・http://wiki.debian.org/DebianInstaller/ReleaseAnnounce に変更点
>> などのドラフトがあるよ
>> ・http://www.debian.org/devel/debian-installer/ から weekly ビルド と
>> daily ビルドをダウンロードしてできる限りの組み合わせでチェック
>> してみてね
>> ・http://d-i.alioth.debian.org/manual/en.i386/ch05s03.html#submit-bug
>> にあるような形で結果をレポートしてくださいな
>>
>> という話です。Lenny を良い形にするために出来る方はご協力を。
>> #こういうのも contribution(貢献と訳されますが、協力でもいいかな)です。
>
> 最新のDailyビルドとWeeklyビルドを各1回行いました。
> レポートを書いてみましたので、コメントいただけると幸いです。
>
> 後半(Weeklyビルド)のComments/Problemsは、現状は画面を撮っただけです。
> 過去の事例がありそうなので、適当な表現をこれから探さなければいけないと
> 思っています。
>
> ----
> Package: installation-reports
>
> Boot method: CD
> Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
> Date: 21-Sep-2008 11:37
>
> Machine: Shuttle SG33G5
> Processor: Intel Core 2 Quad Q6600
> Memory: 4096MB
> Partitions: <df -Tl will do; the raw partition table is preferred>
>
> /dev/sda1     ext3   305054196   3565480 285992824   2% /
> tmpfs        tmpfs     1680004         0   1680004   0% /lib/init/rw
> udev         tmpfs       10240        92     10148   1% /dev
> tmpfs        tmpfs     1680004         0   1680004   0% /dev/shm
> /dev/sdb1     vfat      127456    126566       890 100% /media/disk
>
> Output of lspci -knn (or lspci -nn):
>
> 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31
> Express DRAM Controller [8086:29c0] (rev 02)
>        Kernel driver in use: agpgart-intel
>        Kernel modules: intel-agp
> 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31
> Express Integrated Graphics Controller [8086:29c2] (rev 02)
> 00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express
> Integrated Graphics Controller [8086:29c3] (rev 02)
> 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #4 [8086:2937] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #5 [8086:2938] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #6 [8086:2939] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB2 EHCI Controller #2 [8086:293c] (rev 02)
>        Kernel driver in use: ehci_hcd
>        Kernel modules: ehci-hcd
> 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
> Audio Controller [8086:293e] (rev 02)
>        Kernel driver in use: HDA Intel
>        Kernel modules: snd-hda-intel
> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 1 [8086:2940] (rev 02)
>        Kernel driver in use: pcieport-driver
>        Kernel modules: shpchp
> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
> Express Port 2 [8086:2942] (rev 02)
>        Kernel driver in use: pcieport-driver
>        Kernel modules: shpchp
> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #1 [8086:2934] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #2 [8086:2935] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB UHCI Controller #3 [8086:2936] (rev 02)
>        Kernel driver in use: uhci_hcd
>        Kernel modules: uhci-hcd
> 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
> USB2 EHCI Controller #1 [8086:293a] (rev 02)
>        Kernel driver in use: ehci_hcd
>        Kernel modules: ehci-hcd
> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
> [8086:244e] (rev 92)
> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IH (ICH9DH) LPC
> Interface Controller [8086:2912] (rev 02)
>        Kernel modules: iTCO_wdt
> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH
> (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02)
>        Kernel driver in use: ata_piix
>        Kernel modules: ata_piix
> 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
> Controller [8086:2930] (rev 02)
>        Kernel driver in use: i801_smbus
>        Kernel modules: i2c-i801
> 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2
> port SATA IDE Controller [8086:2926] (rev 02)
>        Kernel driver in use: ata_piix
>        Kernel modules: ata_piix
> 01:00.0 IDE interface [0101]: JMicron Technologies, Inc. JMB368 IDE
> controller [197b:2368]
>        Kernel driver in use: JMicron IDE
>        Kernel modules: jmicron
> 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
> 88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
>        Kernel driver in use: sky2
>        Kernel modules: sky2
> 03:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
> IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
>        Kernel driver in use: ohci1394
>        Kernel modules: ohci1394
>
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot:           [O]
> Detect network card:    [O]
> Configure network:      [O]
> Detect CD:              [O]
> Load installer modules: [O]
> Detect hard drives:     [O]
> Partition hard drives:  [O]
> Install base system:    [O]
> Clock/timezone setup:   [O]
> User/password setup:    [O]
> Install tasks:          [O]
> Install boot loader:    [O]
> Overall install:        [O]
>
> Comments/Problems:
>
> <Description of the install, in prose, and any thoughts, comments
>      and ideas you had during the initial install.>
> ----
> Package: installation-reports
>
> Boot method: CD
> Image version: http://cdimage.debian.org/cdimage/weekly-builds/i386/iso-cd/debian-testing-i386-CD-1.iso
> Date: 15-Sep-2008 13:27
>
> Machine: Shuttle SG33G5
> Processor: Intel Core 2 Quad Q6600
> Memory: 4096MB
> Partitions: <df -Tl will do; the raw partition table is preferred>
>
> Output of lspci -knn (or lspci -nn):
>
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot:           [E]
> Detect network card:    [ ]
> Configure network:      [ ]
> Detect CD:              [ ]
> Load installer modules: [ ]
> Detect hard drives:     [ ]
> Partition hard drives:  [ ]
> Install base system:    [ ]
> Clock/timezone setup:   [ ]
> User/password setup:    [ ]
> Install tasks:          [ ]
> Install boot loader:    [ ]
> Overall install:        [ ]
>
> Comments/Problems:
> After loading the kernel, following the failed hard disk access.
> http://image.blog.livedoor.jp/tyamada22/imgs/2/9/29baf43d.JPG
> ----
>
> このあと、インテルG31チップセットのシステムでのテストを予定しています。
> また、確実にインストールできそうな古いシステムも準備中です。
>
> --
> Takuma Yamada <tyamada@xxxxxxxxxxxxxxxx>
> http://blog.livedoor.jp/tyamada22/

-- 
Takuma Yamada <tyamada@xxxxxxxxxxxxxxxx>
http://blog.livedoor.jp/tyamada22/